Do you have a question about the MC1018 and is the answer not in the manual?
Questions and answers
Keith Flitcroft
February 10, 2025
How do you change a belt
1 comments:
Mr. Anderson
February 11, 2025
To change the belt on a Master Quality Power MC1018:
1. Open the back lid (part 20) of the headstock (part 19). 2. Loosen the socket head bolt (part 33). 3. Remove the motor plate (part 31). 4. Change the speed by moving the drive belt (part 26) to the desired position. 5. Reattach the motor plate (part 31) and tighten the socket head bolt (part 33). 6. Secure the back lid (part 20) to the headstock (part 19) using the semicircle head screws (part 21) and washer.
Ensure all parts are properly tightened before operating the machine.
Need help?
Do you have a question about the MC1018 and is the answer not in the manual?
Questions and answers
How do you change a belt
To change the belt on a Master Quality Power MC1018:
1. Open the back lid (part 20) of the headstock (part 19).
2. Loosen the socket head bolt (part 33).
3. Remove the motor plate (part 31).
4. Change the speed by moving the drive belt (part 26) to the desired position.
5. Reattach the motor plate (part 31) and tighten the socket head bolt (part 33).
6. Secure the back lid (part 20) to the headstock (part 19) using the semicircle head screws (part 21) and washer.
Ensure all parts are properly tightened before operating the machine.
This answer is automatically generated
mounting a new belt
Can a replacement motor be bought