Garmin G1000 Manual page 50

TRAFFIC
Changing the Map Range
To change the map range:
1. Turn the joystick clockwise to zoom out or turn
the joystick counter-clockwise to zoom in. Map
ranges are 2 nm, 6 nm and 12 nm.
NOTE: If the intruder aircraft is non-altitude
reporting only the range and bearing will be
displayed.
Operating Mode
Once the aircraft is airborne the system switches from
ground or standby mode to operating mode. The G1000
displays 'OPERATE' in the upper left hand corner of the
display and begins to display traffic on the Traffic or Map
Page.
The TIS Traffic Advisory (TA) should alert the crew
to look for intruding aircraft any time a yellow circle
traffic symbol appears and voice warning is announced.
Conduct a visual search for the intruder. Maintain
visual contact to ensure safe separation.
When the aircraft is on the ground the system switches
from operating mode to ground or standby mode. The
Traffic Map Page displays 'GND' or 'STANDBY'.
• STANDBY – when the Traffic Map Page displays
'STANDBY' in the status box on the Traffic Map
Page, the TIS system is in standby mode and
cannot display traffic data.
• GND – when the Traffic Map Page displays 'GND'
in the status box on the Traffic Map Page, the TIS
system does not display traffic data. The GTX 33
does not reply to Mode A or Mode C interroga-
tions but does send Mode S acquisition replies.
The ground mode is entered automatically. It is
not a crew selectable mode.
7-48
190-00498-00_0A.indd 48
Garmin G1000 Hazard Avoidance Pilot's Guide for the Cessna Citation Mustang
• OPERATE – when the Traffic Map Page displays
'OPERATE' in the status box on the Traffic Map
Page, the TIS system is operational and displays
traffic on the Traffic and Map Pages.
The crew can switch between the standby (STBY) and
operate (ON) modes to manually override automatic op-
eration using the page menu or softkeys.
To switch between operating modes:
Press the MODE softkey.
1.
2. Press the STBY or ON softkey to switch between
modes. 'STANDBY' or 'OPERATE' is displayed
in the status box located in the upper left
corner of the Traffic Map Page, OR:
3. Press the MENU key. The page menu is
displayed with 'Standby Mode' or 'Operate
Mode' highlighted. Press the ENT key on the
desired selection.
190-00498-00 Draft
3/1/2005 10:33:57 AM