Toa SX-2000CI Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Toa Manuals
  4. I/O Systems
  5. SX-2000CI
  6. Operating instructions manual
Toa SX-2000CI Operating Instructions Manual

Toa SX-2000CI Operating Instructions Manual

Hide thumbs Also See for SX-2000CI:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
CONTROL INPUT UNIT
CONTROL OUTPUT UNIT
SX-2000CI
SX-2000CO

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ........................... 2
2. GENERAL DESCRIPTION ......................... 3
Connection ........................................... 8
4.2. Connection Example ............................ 9
4.3. Power Supply Connections ................ 10
Note
Two modes of operation are made available for the SX-2000CI and SX-2000CO: Normal mode
where the unit operates within the SX-2000 system and Stand-alone mode where the unit
operates independently of the SX-2000 system.
This book provides instruction when the SX-2000CI and SX-2000CO are used in stand-alone
mode.
When using them in normal operation mode, refer to the instruction manual enclosed with the
SX-2000SM System Manager of the SX-2000 series.
Thank you for purchasing TOA's Control Input Unit and Control Output Unit.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
FOR STAND-ALONE MODE
OPERATING INSTRUCTIONS
1
2
3
4
5
6
7
8
17
9
10
11
12
13
14
15
16
25
CONTROL INPUT
1
2
3
4
5
6
7
8
17
9
10
11
12
13
14
15
16
25
CONTROL OUTPUT
(SX-2000CI Only) ............................... 14
(SX-2000CO Only) ............................. 14
5.1. Stand-Alone Mode Setting ................. 15
Inputs (SX-2000CI Only) .................... 16
SX-2000CI
SX-2000CO
18
19
20
21
22
23
24
26
27
28
29
30
31
32
CONTROL INPUT UNIT SX - 2000CI
18
19
20
21
22
23
24
26
27
28
29
30
31
32
CONTROL OUTPUT UNIT SX - 2000CO
POWER
CPU OFF
FAULT
POWER
CPU OFF
FAULT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SX-2000CI and is the answer not in the manual?

Questions and answers

Related Manuals for Toa SX-2000CI

Summary of Contents for Toa SX-2000CI

  • Page 1: Table Of Contents

    6.2. SX-2000CO Control Output Unit ..20 Note Two modes of operation are made available for the SX-2000CI and SX-2000CO: Normal mode where the unit operates within the SX-2000 system and Stand-alone mode where the unit operates independently of the SX-2000 system.

  • Page 2: Safety Precautions

    · When connecting the power cord of the DC may cause fire or electric shock. power supply panel for the SX-2000CI/CO to an · If you detect smoke or a strange smell coming AC outlet, ensure that the total load current never from the unit.

  • Page 3: General Description

    The front-mounted indicators of each unit show the control input status or control output status. The SX-2000CI and SX-2000CO are 1U-size* units that can be mounted in an EIA equipment rack. It has 2 power supply inputs, one of which can be connected to a backup power source to protect against power failures.

  • Page 4: Nomenclature And Functions

    ID NUMBER RESET SETTING 1. Control Input Indicators 8. Reset Key [RESET] [CONTROL INPUT 1 – 32] (Green) Pressing this key restarts the SX-2000CI. Light when the corresponding control inputs are turned ON. 9. DIP Switch [SETTING] • Switch 1 2.
  • Page 5 [Rear] 14 15 CONTROL INPUT CI/CO LINK DC 24V OUT THROUGH DATA MAX. 0.1A 10. Functional Earth Terminal [SIGNAL GND] 13. Control Input Terminals Hum noise may be generated when external [CONTROL INPUT 1 – 32] equipment is connected to the unit. Connecting Photo coupler inputs.

  • Page 6: Sx-2000Co Control Output Unit

    4. FAULT Indicator [FAULT] (Yellow) Sets operation mode. (See p. 15.) Lights when communications with the connected ON: Operates in stand-alone mode. SX-2000CI are interrupted. OFF: Operates in normal mode. 5. USB Port [USB] • Switches 2 – 8 This port is not used.
  • Page 7 When driving the unit with the power supply unit 15. CI/CO Link Data Terminal [CI/CO LINK DATA] connected to the SX-2000CI, connect the power Connect this terminal to the CI/CO Link Terminal supply to this terminal via an optional RM-200RJ of the SX-2000CI.

  • Page 8: Connections

    4. CONNECTIONS 4.1. Removable Terminal Plug Connection Notes • Do not use a micro screwdriver. Sufficient torque is not given to the screws when tightening them, and connections may not be secured. • Avoid soldering stranded or shielded cable, as contact resistance may increase when the cable is tightened and the solder is crushed, possibly resulting in an excessive rise in joint temperatures.

  • Page 9: Connection Example

    Note: For the detailed information on the connections of power supply unit and CI/CO links, refer to the page indicated at the end of each "Connection example." 4.2.1. Connection example 1 Connect each 2 power supply units to the SX-2000CI and SX-2000CO separately. (See p. 10 and 15.) Program timer SX-2000CI...

  • Page 10: Power Supply Connections

    A channel of the DC power input terminal and the other power supply unit to the B channel of the DC power input terminal on the SX-2000CI. Connect the power supply units to the SX-2000CO in the same manner.
  • Page 11 Both the SX-2000CI and SX-2000CO can be driven by connecting 2 power supply panels to the SX-2000CI only. Connect the DC power input terminals of the SX-2000CI to those of the SX-2000CO and the CI/CO link data terminals of the SX-2000CI to those of the SX-2000CO via the RM-200RJ Terminal Unit (optional).
  • Page 12 AWG14 – 18 STP Category 5 straight cable (with RJ45 connectors) Shield AWG14 – 18 SX-2000CI Over 3-pair shielded RM-200RJ CPEV cable (main cable) CI/CO link data terminal DC power input terminal AWG14 –...
  • Page 13 Note When connecting the power supply unit to one of the equipment, be sure to connect it to the SX-2000CI side. If it is connected to the SX-2000CO side, the maximum cable length between the SX-2000CI and SX-2000CO may be reduced.

  • Page 14: Control Input Connections (Sx-2000Ci Only)

    4.4. Control Input Connections (SX-2000CI Only) This connection example allows timer-activated automatic broadcasts. When the TT-104B's preprogrammed time is reached, the SX-2000CI receives a control output signal (make contact) from the TT-104B and activates preset broadcast patterns. TT-104B OUTPUT CHANNEL (24 V DC 0.5 A) program timer OUTPUT CHANNEL (24 V DC 0.5 A)

  • Page 15: Ci/Co Link Terminal Connections

    THROUGH DATA CI/CO link through switch: OFF (Factory preset: OFF) The SX-2000CI and SX-2000CO can be connected using the shielded CPEV cable (1-pair for data line) via the optional RM-200RJ Terminal unit. Note Total cable length connecting CI/CO link terminals within the system must be kept shorter than 800 m.

  • Page 16: Priority Control Settings Of The Control Inputs (Sx-2000Ci Only)

    Step 3. Set the link through switch on the SX-2000CI/CO's rear panel to the OFF position. Note: The CI/CO link through switch is set to OFF by default. SX-2000CI rear CI/CO LINK THROUGH DATA CONTROL INPUT CI/CO LINK DC 24V OUT THROUGH DATA MAX.
  • Page 17 5.2.1. No priority control (DIP switch 3: OFF, DIP switch 4: OFF) In this mode, priority control is disabled. (Factory default) SETTING For example, closing the control input 2 while the control input 1 is closed causes the control output 2 to close simultaneously while the control output 1 remains closed.
  • Page 18 5.2.3. Last-in-first-out (DIP switch 3: OFF, DIP switch 4: ON) The most recent control input takes precedence over the earlier one. SETTING For example, closing the control input 2 while the control input 1 is closed causes the control output 1 to open. The control output 1 becomes closed when the control input 2 is opened.

  • Page 19: Specifications

    Shielded CPEV cable* or STP Category 5 straight cable * When connecting the power supply to each unit: 1-pair for data line When connecting the power supply only to the SX-2000CI: 1-pair data line and 2-pair power line for a redundant power supply...

  • Page 20: Sx-2000Co Control Output Unit

    Shielded CPEV cable* or STP Category 5 straight cable * When connecting the power supply to each unit: 1-pair for data line When connecting the power supply only to the SX-2000CI: 1-pair data line and 2-pair power line for a redundant power supply...

This manual is also suitable for:

Sx-2000co

Table of Contents