1.3 Quick start 1.4 LED indicator Statue Green – GSM Blue – GPS Red – Purple – Missed SMS/Calls Power Dark No internet/ No SIM card Flashing (every GSM is on Searching for Low battery Missed SMS/calls 1 second) GPS signal Bright GPRS is connected GPS is located Charging Indicated order: (1) No internet/ No SIM card (2) Missed SMS/calls (3) Low battery/ GPS is working (4) GPRS is connected (5) GSM is on 2 Function of buttons ...
SOS Button When the device is off, long press to turn it on. In standby mode, long pressing the button will call the pre‐set SOS numbers in turns for three times until the call is picked up. During phone calls, short press to hang up. During ringtone setting, when the ringtone is playing, short press to stop. Power Off The device can only be turned off when the restricted power off function is off. NOTE: (1) In standby mode, long press any Family Numbers to dial the relative number; (2) When Family numbers call in, short press any Family Number buttons to answer the phone call; (3) During phone calls, long press family numbers can switch between receiver and speaker. 3 Before use 3.1 Check the accessories After open the box, please check whether the accessories are complete. If there is anything missing, please contact your supplier. ...
because the battery runs out. Warning: Please charge in a ventilated place with the temperature of 0℃‐40 ℃and use standard charger provided by your supplier. The damage caused by inappropriate charger will be against our warranty. 3.5 SIM card (1) Turn off the device before you insert or take our your SIM card; (2) Open the front cover of the device; (3) Insert the SIM card in the SIM card slot with the metal part facing down. NOTE: Please use a SIM card with GSM network, GPRS and caller ID function. Warning: Please turn off the device before you inset or take out your SIM card. It is forbidden to do it with external power connected; otherwise your SIM card may be damaged. 4 Parameter setting 4.1 Set APN Please send SMS command to the number of device so as to set up the APN parameter. The device will reply “OK” automatically after setting successfully. The SMS command is as follows: ...
Page 6
4.2.2 Delete SOSNumbersVia SMS command Send SMS command: SOS,D,1,2,3# (D means delete SOS number) e.g. SOS,D,1# means delete the first number SOS,D,3# means delete the third number If you do not know the sequence number, you can also delete the number by SMS command like this: SOS,D,number# e.g.SOS,D,13527852360#means delete this SOS number directly. It will reply “OK” if the number is deleted successfully. 4.2.3 Add SOS numbers via platform You can set SOS number via the platform after activating the terminal. 4.3 Set Family Numbers 4.3.1 Add/delete Family Numbers via SMS command Family numbers can only be added or deleted by the commands sent by SOS numbers. (1) Add three Family Numbers Send SMS command:FN,A,Name1,Phone Number1,Name2,Phone Number2,Name3,Phone Number3# (A means add numbers) e.g. FN,A,Dad,13510***360,Mom,1351***85136,Grandma,1352****9982# (2) Add one Family Number To add the first Family Number, send SMS command: FN,A,Name1,Phone Number1# e.g. FN,A,Dad,13510***360# To add the first Family Number, send SMS command: FN,A,,Name2,Phone Number2# e.g. FN,A,,Mom,1351***85136# To add the third Family Number, send SMS command: FN,A,,,Name3,Phone Number3# ...
Page 7
4.4 Call Family Numbers Long press Family Number buttons can call preset numbers. Short press SOS button can hang off the call. NOTE: When the people you call pick up the phone, the terminal will vibrate slightly. 4.5 Answer phone calls When calls come, it will ring or vibrate according to the settings. The button will light up when relevant Family Numbers call in. If the calls come from the White List, button 1,2 and 3 will light up. 4.6 White List To avoid the situation where students might be interfered, 15 White List numbers can be set on platform. 4.7 Anti disturb mode(off as default) The device has anti‐disturb function and its default state is off. It can be scheduled to be off in class hour. When the device is in off state, no one can call in. Off Day: School day, Saturday,Sunday 8 Period can be set. 4.8 Low battery alarm SOS number will receive low battery alarm when the device is running out of battery. 4.9 Call reminder mode There are three modes of call reminder: ringtone/ vibration/ ringtone and vibration. It can be set by sending SMS: CALLMODE,0/1/2# (0 means ringtone; 1 means vibration; 2 means ringtone and vibration). e.g. CALLMODE,1# means the device will vibrate when calls come in. NOTE: 10 ringtones can be set on platform. 4.10 Power Off Limited function Send command: PWRLIMIT,ON# to turn on the function; ...
PWRLIMIT,OFF# to turn off the function. NOTE: Only can SOS number turn on/off the function. The function can also be turned on/off on platform. 5 SOS alarm Long press SOS button for 3 seconds can activate GPS. The device will vibrate twice and dial pre‐set SOS numbers in turns for three times until one of them answers. In the meanwhile, it will send location to SOS numbers. NOTE: SOS number should be set. 6 GPS working period If the working period is set, GPS will work during the pre‐set period. If the working period is not set, it will not upload GPS data. It is recommended to set working period on the time after classes. ...
8 Voice monitor When SOS number sends monitor command: MONITOR# to the terminal, the terminal will reply “OK” and call the SOS number. After the call connected, the terminal will enter monitor condition. The SOS number can hear the sound around the terminal. 9 Geo‐fence (Off as default) Log in the platform to set the geo‐fence. When the device is leaving or entering a pre‐set area, it will send alarm to pre‐set family number. Appendix 10.1 Battery security Please use the original battery. The warranty will be invalid by using any other accessory. The manufacturer will not take any responsibility for any damage caused by not using the original battery. The new battery can realize the optimal performance after fully‐ charging for 2 or 3 times. The battery can be used for hundreds of times, yet it will wear out eventually. When its talking time and standby time shrinks sharply, you need a new one. Cut off power supply when not using the charger. Don’t charge the battery for more than one week, since over charging will reduce its using time. Do not short‐circuit the battery with metal stuff (such as the key in your pocket) Do not bend or open the battery. Do not put the battery into water or fire. The battery should never be charged at temperature below 0 degrees or above 45 degrees Celsius. ...
10.2 Trouble shooting Common problems Causes Solutions Radio waves cannot communicate with device when it is used in a Replace the fuse bad signal area, like basement or Bad reception space besides tall building. Cannot talk in Call‐intensive period. Devicefails to switch No power on Calls fail toget Have not setup the family through number for that key. SIM card installed incorrectly Check the SIM card The sheet mental of SIM card is Wipe with a clean wiper. dusty Device fails connect Contact your internet service Invalid SIM card to the network provider Move back to the GSM service Out of GSM service area covered area. Weak signal Try again in a strong signal area Voltage is out of charging range of ...
Page 11
-Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types BNK-MOV01 (FCC ID: 2AG9H-BNKMOV01) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory are 0.45 W/kg, 0.23 W/kg respectively.