Download Print this page

Advent KIRK 4020 User Manual

Dect telephones with a panasonic 308 pbx

Hide thumbs Also See for KIRK 4020:

Table of Contents

Download this manual See also: Operator's Manual

V2.0 USER GUIDE

FOR THE

ADVENT xt

KIRK 4020/4040 DECT TELEPHONES

WITH A PANASONIC 308 PBX

Tynetec operate a policy of continual product improvement. If any variation

to the details contained in this guide are suspected please contact

Tynetec's Customer Support Department on 01670 352371

15 September 2009

FM0421 issue D Page 1

Table of Contents

Need help?

Do you have a question about the KIRK 4020 and is the answer not in the manual?

Page 1 V2.0 USER GUIDE FOR THE ADVENT xt KIRK 4020/4040 DECT TELEPHONES WITH A PANASONIC 308 PBX Tynetec operate a policy of continual product improvement. If any variation to the details contained in this guide are suspected please contact Tynetec's Customer Support Department on 01670 352371...
Page 2 2.3 CHECKING THE CALL MEMORY The Advent xt system stores the last 8 alarm messages in the Call Memory. To check the Call Memory; press the Line key, enter 8 1 and listen for the “Ready” prompt. Enter the code 1009 and press the key.
Page 3 3.2 SETTING THE LOCAL OFFSITE DIAL SEQUENCE The Advent xt system can store up to 6 Local Offsite telephone numbers and the order in which they are dialled can be changed. Press the Line key, enter 8 1 and listen for the “Ready”...
Page 4 6007 3008 Reset a Flat from Intruder Mode 6008 3009 List Flats with Intruder Mode Enabled 6009 For more detailed information see the full Advent xt Operators Manual (Tynetec Doc No. FM0420) 15 September 2009 FM0421 issue D Page 4...

Kirk 4040