1. Manuals
  2. Brands
  3. S.Wear Manuals
  4. Receiver
  5. Loop R8
  6. User manual

S.Wear Loop R8 User Manual

Wireless portable audio receiver
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
R8

Advertisement

Table of Contents
loading

Summary of Contents for S.Wear Loop R8

  • Page 2: Package Contents

    PACKAGE CONTENTS 1.Gift Box 2.Wireless Audio Receiver 3.a Manual PRODUCT OVERVIEW BUTTON CONTROL a. Power On: When off, Press and hold the MFB for 2 seconds . b. Power off: When on, Press and hold the MFB for 3 seconds . c.

  • Page 3: Led Indicators

    Number Redial: Press the MFB button twice to redial the latest phone number . j.Paring Mode: When the loop R8 is off, Press and hold the MFB button for 5 seconds until the LED indicator Flashes red and blue ,activate BT on your phone and set it to search for loop R8.

  • Page 4: Safety And Care

    Red-Flashing Low Battery Pairing with Two BT Devices at the Same Time You can pair your loop R8 with two devices ,but only one of them can play music or make phone calls with the R8 at any time 1.)Follow the previous instructions in the ”Pairing “section above to pair R8 to your first device.
  • Page 5 1.)Although the Receiver are equipped with necessary battery regulators, it is recommended not to use Quick/Fast Chargers which tend to over-charge the device and can reduce the lifespan of the battery substantially. 2.)Do not charge R8 when they are Wet due to sweat or other Moisture.

  • Page 6: Troubleshooting

    10.)Overcharging or keeping the Receiver in a closed car or similar environment for long periods will reduce the capacity and life of the battery. It is not recommended to charge your Receiver overnight. WARING： Using Receiver at high to moderate Volumes for extended periods of time will result in permanent hearing damage .It is advised you keep volume levels moderate to low at all times for your safety.
  • Page 7 A: Please do the following:  Make sure the Receiver is turned on and the LED indicator is flashing blue and red.  Make sure the Receiver and the BT device are close to each other within 3 feet.  Turn off the Receiver and the BT device, then turn on the Receiver and then restart BT device.
  • Page 8  Your BT device is connected to Receiver. The LED indicator should flash blue once every 5 seconds.  Make sure the volume is at an audible level on both your Receiver and the BT device.  Make sure the BT device is playing music/audio. Q: The LED indicator does not show solid red when charging the Receiver.

Table of Contents