Replacing The Microprocessor - Lenovo V510z User Manual And Hardware Maintenance Manual

Replacing the microprocessor

Attention
1
Remove the computer stand. For details, see
Stand.
2
Remove the computer cover. For details, see
3
Remove the optical drive. For details, see
4
Remove the VESA mount bracket. For details, see
5
Remove the middle frame. For details, see
6
Remove the system board shield. For details, see
7
Remove the heat sink. For details, see
8
Replace the microprocessor.
Note
1
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Replacing the heat sink.
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts on
the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The
socket pins must be kept as clean as possible.
Replacing the monitor stand
Removing the computer cover.
Replacing the optical drive.
Replacing the VESA mount bracket.
Replacing the middle frame.
Replacing the system board shield.
2
or
Replacing the UltraFlex II
52