Page 1
www.lightemotion.com.au LEDBAR1812 Outdoor 1m LED Bar 18 x 12W 6-in-1 RGB LEDs User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference V1.00...
Introduction Thank you for the purchase of your LEDBAR18012 Outdoor 1m LED bar with 18 x 12w 6-in-1 LEDs by Light Emotion. We are confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly to avoid any potential problems.
- In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. - Make sure power cord is never crimped or damaged.
4. Menu Operation Used for setting up or operating the product without DMX control: Menu: Press each time to access features – see table below: UP: Increase setting DOWN: Decrease setting Enter: Confirm and save setting. Display Numerical Function and Description Show Value d001...
5. DMX Channel Allocation and functions tables. There are 6 different DMX profiles for this fixture. This allows the user to use simple overall control over fewer DMX channels or for the user to individually control each individual feature of the light over many more channels. You must choose the DMX mode/profile prior to setting up with DMX.
5b. Six Channel DMX Mode Function Description Channel DMX value Red dimming , from dark to bright 000-255 Green dimming , from dark to bright 000-255 Blue dimming , from dark to bright 000-255 White dimming , from dark to bright 000-255 Amber dimming , from dark to bright 000-255...
5f. 110 Channel DMX Mode Function Description Channel DMX value Master dimming ,from dark to bright 000-255 Master Strobe, from slow to fast 007-255 R1 dimming , from dark to bright 000-255 G1 dimming , from dark to bright 000-255 B1 dimming , from dark to bright 000-255 W1 dimming , from dark to bright...
6. DMX-512 Control Connection Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to other fixtures with 3 pin XLR inputs and outputs. When not using DMX, multiple fixtures can be connected together and operate under master/slave control. The signal cable should have two core with shielded cable, the signal connectors are XLR input and output connectors.
8. DMX Terminator: A DMX terminator helps to reduce ‘noise’ on the DMX chain, and makes the light respond to control more accurately. It should be plugged in to the last fixture in any chain. For Terminator connections please see below: 9.
We recommend you register your warranty online at www.industrygear.com.au. Purchased from:_________________________________________ Contact Details:_________________________________________ Date Purchased:_________________________________________ Invoice/Receipt Number:__________________________________ Copyright Light Emotion 2016. E&OE Exclusively imported by LSW Imports and Distribution PO Box 887, Kingsgrove, NSW, 2208 sales@lswonline.com.au www.lightemotion.com.au 1800 643 111 (within Australia)