Usb/Ipod® Mode; Aux Mode - Chrysler Uconnect 3.0 Owner's Manual Supplement

16 MEDIA MODE
USB/iPod® Mode
USB/iPod® Mode is entered by either inserting a USB
Jump Drive or iPod® cable into the USB port, or by
pushing the MEDIA button on the faceplate located to the
left of the display. Once in Media Mode, push the MEDIA
button and select USB/iPod®.
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the USB port. If
you insert a USB/iPod® device with the ignition ON and
the radio ON, the unit will switch to USB/iPod® mode and
begin to play when you insert the device. The display will
show the track number, and index time in minutes and
seconds. Play will begin at the start of track 1.

AUX Mode

AUX Mode is entered by inserting an AUX device using
a cable with a 3.5 mm stereo audio jack into the AUX
port, or by pushing MEDIA button on the faceplate
located to the left of the display. Once in Media Mode,
press the MEDIA button and select "AUX."
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
port. If you insert an Auxiliary device with the ignition
ON and the radio ON, the unit will switch to AUX mode
and begin to play when you insert the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the ON/OFF VOLUME rotary knob, or with the
volume of the attached device.
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.