Advertisement
Assembling your scooter
1. Attach handlebar to board.
Insert handlebar rod into hole
between the two front wheels,
facing the micro chip towards the
back of the scooter. Push down
until you hear a
snapping
sound.
2. Adjust handlebar's height.
Press and hold on silver
lock
button
and pull handlebar to
desired height.
Water goes here
3. Fill jets with water.
Tilt scooter up
90
degrees. Push
down onto water insert button,
and pour no more than
3 ounces
of
distilled
water onto water insert
button (pictured).
4
Advertisement
