Connecting A Vhf Or Combined Vhf/ Uhf Antenna, Through A Coaxial Cable; Connecting A Vhf Antenna With Coaxial Cable And A Uhf Antenna With Twin Lead Cable - Sony Trinitron KV-14B80 Operating Instructions Manual

Connecting and Installing the TV (continued)
3
Connect the antenna connector to the
VHF/UHF mixer (not supplied).
VHF/UHF mixer
(not supplied)
4
Connect the VHF/UHF mixer (not
supplied) to the VHF/UHF antenna
terminal.
Connecting a VHF or combined
VHF/UHF antenna, through a
coaxial cable
Note:
• The end of the coaxial cable of your
combined VHF/UHF antenna has a F type
plug, connect it directly to the VHF/UHF
antenna terminal (in this case, however,
ignore the instructions below, as there is no
need for the antenna connector).
6
1
Prepare the end of the coaxial cable.
antenna
connector
(supplied)
2
Remove the cover of the antenna connector
(press the end of the two pins), position the
coaxial cable and replace the cover.
tighten, using pliers
coaxial cable
3
Connect the antenna connector to the
VHF/UHF antenna terminal.
6 mm 7 mm
connector
cover
end of pin
antenna connector
(supplied)
Connecting a VHF antenna with
coaxial cable and a UHF antenna
with twin lead cable
1
Connect the end of the coaxial cable to the
antenna connector, following steps 1 and 2
mentioned in the diagram above.
Note:
• If the end of the coaxial cable of your VHF
antenna has an F type plug, connect it
directly to the VHF/UHF mixer (not
supplied) ( in this case ignore steps 1 and 2
described in the diagram above) and follow
steps 2 and 3 below.
2
Connect the antenna connector (or the F
type plug) to the VHF/UHF mixer (not
supplied).
UHF twin lead cable
VHF/UHF mixer
(not supplied)
3
Connect the VHF/UHF mixer (not
supplied) to the VHF/UHF antenna
terminal.
VHF coaxial cable
antenna
connector
(supplied)