1. Manuals
  2. Brands
  3. iControl Manuals
  4. Transceiver
  5. iscan
  6. User manual

iControl iscan User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
iControl Incorporated
http://www.iControl-Inc.com
iSCAN™
User's Manual
Background.
The iSCAN™ is 2.4GHz bi-directional radio transceiver equipped with a CCD barcode scan engine and
status LCD screen. A User may configure the device to execute a number of commands based on the
type and content of Code-128 or Code-39 encoded barcodes. The iSCAN™ may interact with iControl
iTAG™ or iCHIME™ products through the Marine Asset Tag Tracking System (MATTS) communication
protocol to build a sensor network, the purpose of which is to support tracking shipping containers in a
worldwide supply chain. An iSCAN™ utilizes a low power, wireless, radio operating in the 2.4 GHz band
as its primary mode of communication. The wireless radio operates in compliance with IEEE Standard
802.15.4-2006. The iSCAN™ utilizes the same radio, processor, and User interface software as iControl's
iTAG™ and iCHIME™ products. The iSCAN™ also supports the same command list as iControl's iTAG™.
The iSCAN™ features two pushbuttons that cycle through and select menu options on the LCD screen, as
well as a push-and-hold trigger to initiate a barcode scan. There are no other connections except the
battery charging contacts. All iSCAN™s should use an iControl provided charger.
Figure 1 iSCAN™ and Related Device

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iscan and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iControl iscan

Summary of Contents for iControl iscan

  • Page 1 An iSCAN™ utilizes a low power, wireless, radio operating in the 2.4 GHz band as its primary mode of communication. The wireless radio operates in compliance with IEEE Standard 802.15.4-2006.

  • Page 2: Other Features

    5. The iSCAN™ has non-volatile on board data storage which may collect data for later upload. 6. iSCAN™ provides date time stamps for all data. The onboard clock for the iSCAN™ is set to UTC by readers in the network.

  • Page 3: Functional Block Diagram

    Please note that the iSCAN™ uses the same command list as the iTAG™ command list. For iSCAN™ command and control, please refer to the iTAG™ Command List for a complete description of commands that control the iSCAN™...

  • Page 4: Absolute Maximum Ratings

    Under no circumstances must the absolute maximum ratings giving in this table be violated. Stress exceeding one or more of the limiting values may cause permanent damage to the device. Parameter Units Condition Users must utilize an iControl provided ™. Charger Supply Voltage charging cradle for the iSCAN Polarity protected.

  • Page 5: General Characteristics

    Incorporated http://www.iControl-Inc.com General Characteristics. (1) Programmable in 5MHz steps starting at 2405MHz per IEEE 802.15.4 iSCAN™ Radio Specification (Transmit).
  • Page 6 Incorporated http://www.iControl-Inc.com iSCAN™ Radio Specification (Receive).
  • Page 7 Module Unique Address Identification. Each iSCAN™ is assigned a unique 8 byte MAC address by iControl Incorporated. The MAC address is used for radio network address identification. The MAC address can not be modified by the User and is located in protected flash memory.

  • Page 8: Fcc Compliance

    Incorporated http://www.iControl-Inc.com FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 9: Fcc Warnings

    Incorporated http://www.iControl-Inc.com Figure 2 iSCAN™ FCC Label Location FCC Warnings: Modifications: Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC Rules. Radio Frequency Exposure: Notes: 1) For mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculators indicate the MPE distance is less.
  • Page 10 Incorporated http://www.iControl-Inc.com NCC 警語 - 減少電磁波影響，請妥適使用 (For Reducing RF Influence, Use Properly) - 為維護隱私權，請妥適使用 (For protect individual privacy, Use Properly) - 本器材須經專業工程人員安裝及設定，始得設置使用，且不得直接販售給一般消費者。 (This device must be installed by expert and will not be sold directly to the general public through retail store) - 低功率電波輻射性電機管理辦法...

Table of Contents