Table of Contents
Advertisement
Note:
Only one person at a time may speak on a DC Group call.
3.6.8 Sending a DC Group Call Invitation
You can send a DC Group Invitation to inform multiple Direct Connect users that you
want to include them in a group call. The users you invite can join or decline by
following prompts on the phone.
1. Touch
>
Contacts
2. Touch a DC Group to open it.
3. Touch
> Invite.
4. Push the Direct Connect button to send an Invitation to all the members in the
group.
3.6.9 Responding to a DC Group Call Invitation
When you receive a DC Group call Invitation, you can either touch
DC Group call or touch
DC Group call.
3.6.10 Attempting to Join a DC Group Call After it has Ended
If you attempt to join a DC Group call after it has ended, a message will display.
•
If you push the Direct Connect button, the DC Group call will begin.
•
If you touch Invite, another message will display. You can push the Direct
Connect button to send an Invitation.
•
If you touch Dismiss, then no operation will be performed.
3.7 Direct Connect Settings
Touch
>
Settings
handles Direct Connect calls, DC Group calls, and so on.
•
One touch
DC: Set the Direct Connect button behavior.
•
Exiting DC Group call I
continue when you exit a DC Group call you initiated.
•
Add member to ongoing
a contact to a Direct Connect or DC Group call.
•
Blocked DC
List: View and modify the list of users you have blocked from
making a Direct Connect call to you.
•
Invitation
ringtone: Set your default incoming DC Group Invitation ringtone.
•
Invitation
timeout: Set the length of time you want the Invitation ringtone to
repeat.
>
DC
Groups.
Ignore
to ignore the Invitation if you do not want to join the
>
DC settings
and then you can control how your phone
initiated: Select the check box to allow the call to
call: Select the check box to allow a member to add
Join
to join the
21
Advertisement
Table of Contents
