Max Usa Copr LM-550A/PC Manual
  1. Manuals
  2. Brands
  3. Max Usa Copr Manuals
  4. Label Maker
  5. LM-550A/PC
  6. Manual

Max Usa Copr LM-550A/PC Manual

Max tube marker
Hide thumbs
Table of Contents

Advertisement

Quick Links

BE SURE TO READ

1.

1-1 INTRODUCTION

Thank you for your purchasing MAX TUBE MARKER LM-550A/PC.
This machine is equipped with a variety convenient features that are designed to print on tubes
and tapes. Make sure to carefully read the "Precautions for Use" and the instruction manual, in
order to use the machine correctly. Since all of the notes shown here are important contents
concerning safety, please carefully observe them.

1-2 PRECAUTIONS FOR USE

[Indications]
This operation manual and the machine use various indications in relation to the safe and proper
operation of the machine. The indications and their meanings are as follows.
WARNING
CAUTION
Describes operation, which may cause a trouble to the instrument and require a
repair, or operation, which requires resetting operation, etc. to restore the condition
of the instrument.
Describes the points of operation and tips.
★
Describes a functional precaution.
[Symbols]
Negligence of this could lead to death or serious injury of an operator.
Negligence of this could lead to an injury of an operator, damage to
your properties, or cause created data be lost.
: Denotes "what you should be aware of."
: Denotes "what you must not do." An indication in or near this symbol
shows a specific prohibition.
: Denotes "what you must do." An indication in this symbol shows a specific
instruction.
1
BE SURE TO READ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-550A/PC and is the answer not in the manual?

Questions and answers

Summary of Contents for Max Usa Copr LM-550A/PC

  • Page 1: Be Sure To Read

    BE SURE TO READ 1-1 INTRODUCTION Thank you for your purchasing MAX TUBE MARKER LM-550A/PC. This machine is equipped with a variety convenient features that are designed to print on tubes and tapes. Make sure to carefully read the “Precautions for Use” and the instruction manual, in order to use the machine correctly.
  • Page 2 BE SURE TO READ WARNING  Never disassemble or modify the machine –– it can cause a fire, electric shock, or trouble.  Never modify the AC cord. The modified cord can led to a fire or electric shock.  Do not put any foreign substance, such as a finger, a pen, or wire, inside the machine ––...
  • Page 3 BE SURE TO READ CAUTIONS  Contents saved in the USB memory and in the internal memory cannot be permanently saved. Please note that we are not responsible for damages or lost profits resulting from data loss attributable to battery consumption, problems, repairs, etc. ...
  • Page 4 BE SURE TO READ In order to prevent problems with the machine, follow the precautions below. 1. This machine and AC adopter are 5. Do not lift up the machine holding its precision products. Handle them cassette cover. The machine may fall. carefully, do not drop them and do prevent them from any shock or impact.
  • Page 5 BE SURE TO READ 10. Do not put metal fragments or similar 15. To avoid the cause of trouble, do not use foreign substances in the USB port or or store the machine in the following USB memory slot, which may cause places.

  • Page 6: Table Of Contents

    BE SURE TO READ 1-3 CONTENTS BE SURE TO READ ....................... 1 1-1 INTRODUCTION ......................... 1 1-2 PRECAUTIONS FOR USE ....................1 1-3 CONTENTS ......................... 6 BEFORE USE ......................... 8 2-1 MAIN FEATURES ........................ 8 2-2 CONFIRMING THE PACKAGE CONTENTS ..............9 2-3 NAME OF EACH SECTION ....................
  • Page 7 BE SURE TO READ 6-7 REPEAT ..........................42 6-8 SEQUENCE ........................43 6-9 FRAME ..........................44 6-10 SYMBOL .......................... 45 6-11 REGISTRATION OF WORD ..................... 46 6-12 IMAGE ..........................48 6-13 ADBANCED SETTINGS ....................48 6-13-1 PRINTING DENSITY ....................49 6-13-2 LOW TEMP.

  • Page 8: Before Use

     MAX original application software (Letatwin PC Editor) is included.  Data created with “Letatwin PC Editor” can be directly printed by USB connection or imported from your PC to LM-550A/PC through USB memory.  Bright and large backlit LCD.

  • Page 9: Confirming The Package Contents

    BEFORE USE 2-2 CONFIRMING THE PACKAGE CONTENTS This machine comes with the following accessories. Confirm that they are included before using the machine. Main unit Carrying case Instruction manual CD-ROM (Application software “Letatwin PC Editor” and the printer driver) AC adapter...

  • Page 10: Name Of Each Section

    BEFORE USE 2-3 NAME OF EACH SECTION Hook Cassette cover LCD display Cutter button Keyboard AC adapter inlet USB cable port USB Memory slot Head pressure switching lever Lock button Tape cassette holder Half cutting depth adjusting M roller lever lever (silver) Head release...
  • Page 11 BEFORE USE NAME OF KEYS AND THEIR FUNCTIONS <1> Keyboard layout <2> Keys and their functions ON/OFF Press this key to turn ON/OFF power. Press this key to return to the previous menu and not to make any changes. When printing or displaying an “IMAGE,“ cancel the operation. Press these key to set the “PRINTED MATERIAL”...
  • Page 12 BEFORE USE Press this key to enter “ADVANCDE SETTINGS”, to enter “DIRECT PRINTING FROM PC” or to enter “DIRECT FILE TRANSFER FROM PC”. OPTION (See 6-13: ADVANCDE SETTINGS , 8-3:PRINTING DIRECTLY FROM “LETATWIN PC EDITOR” or 8-4: SAVING DATA DIRECTLY FROM “LETATWIN PC EDITOR”) IMAGE Press these keys to display the printing image.

  • Page 13: Input Screen

    BEFORE USE A / a Press this key to switch capital letters to small letters, or vice versa. Press this key to access secondary characters on the key or the secondary SHIFT functions of group (3), (4), (8), (9) and (13). Press this key to move to the “PRINT”...

  • Page 14: Selecting The Screen Language

    2-6 SELECTING THE SCREEN LANGUAGE Multiple screen languages can be selected, according to the model type of your machine. Model type Language LM-550A/PC A11-T, A12-TH English or Chinese(T) (Traditional Chinese Character) LM-550A/PC A12-C, A11, English or Chinese(C) (Simplified Chinese Character)

  • Page 15: Cleaning The Platen Roller Or Removing Jammed Tube ("Feed" Function)15

    BEFORE USE 2-7 CLEANING THE PLATEN ROLLER OR REMOVING JAMMED TUBE (“FEED” function) 1. Open the cassette cover. 2. While pressing C , press ON/OFF for about 3 seconds. Then, release ON/OFF first while displaying the logo of “LETATWIN.” 3. [FEED screen] appears. Ｆ...

  • Page 16: Adjusting The Half Cutting Depth

    BEFORE USE 2-8 ADJUSTING THE HALF CUTTING DEPTH Half cutting depth can be adjusted with the ”Half cutting depth adjustment lever”, when half cutting depth is not adequate. Deep Note: ● When printing on tubes, the lever has to be positioned on the “TUBE.”...

  • Page 17: Loading The Consumables

    (Black) (Green or Blue) ● Ribbon case Note: Use a ribbon case (LM-RC500) for (LM-550A/PC) Ribbon case LM-RC300 cannot be used for LM-550/PC. Also, ink ribbon LM-IR50B/LM-IR50W/LM-IR50BP cannot be set in ribbon case LM-RC300. 1. Install a new ribbon to the ribbon case.
  • Page 18 LOADING THE CONSUMABLES 3. While pressing “Button A,” set the Insert winding core (black) as shown in the figure. Then, release “Button A” to lock the ribbon. Press Button A Release 4. Rotate the ink ribbon toward the direction The color changes. of the arrow until the black surface appears.

  • Page 19: Loading The Tubes And The Ink Ribbon Case

    LOADING THE CONSUMABLES 3-2 LOADING THE TUBES AND THE INK RIBBON CASE 1. Open the cassette cover. 2. Push the head release lever (green) behind. Head release lever 3. Slide the switching lever (silver) to the right until it stops. Switching lever *When using φ1.5/2.0mm tubes, set a special attachment as shown below.
  • Page 20 LOADING THE CONSUMABLES 4. a: Pass the tubes under the holding plate. b: Extrude the tip of the tubes by 1～2cm from the machine. Holding plate 1~2cm Pull out 5. Place and hold the tube on the “TUBE” label and slide the “Switching lever” to lock.
  • Page 21 LOADING THE CONSUMABLES 6. Make sure the ribbon is not slack. If the ribbon is slack, rotate the winding core (black) toward the direction of the arrow to remove the slack of the ribbon. 7. Hold the ink ribbon case as illustrated below and load it completely. Proper loading Check the slack.
  • Page 22 LOADING THE CONSUMABLES (Removing the tube) 1. Open the cassette cover. 2. Push the head release lever behind. 3. Slide the switching lever (silver) to the right until it stops, then remove the tube. Note: You don’t need to remove the ink ribbon case when removing tube.

  • Page 23: Loading The Tape Cassette And The Ink Ribbon Case

    LOADING THE CONSUMABLES 3-3 LOADING THE TAPE CASSETTE AND THE INK RIBBON CASE 1. Open the cassette cover. 2. Push the head release lever (green) behind. Head release lever 3. Slide the switching lever (silver) to the right until it stops, as shown in the figure. Remove Switching lever 4.
  • Page 24 LOADING THE CONSUMABLES 6. Hold the ink ribbon case as illustrated below and load it Proper loading Note: Make sure the ribbon is not slack. 7. Pull the head release lever (green) forward. 8. Close the cassette cover until it clicks. (Removing the tape cassette) 1.

  • Page 25: Replacing The Half Cutter

    LOADING THE CONSUMABLES REPLACING THE HALF CUTTER 1. Open the cassette cover. 2. Pull out the half cutter. 3. Engage the guide of the half cutter to the groove of the half cutter holder and insert it completely. Note: If the guide is not properly engaged in the groove, the half cutter or the machine might be damaged.

  • Page 26: Basic Operation

    BASIC OPERATION BASIC OPERATION 1. Open the cassette cover and load the consumables to use. (See 3: LOADING THE CONSUMABLES) Then, close the cassette cover and turn the power on. 2. [PRINTED MATERIAL setting screen] appears. ［ＰＲＩＮＴＥＤ ＭＡＴＥＲＩＡＬ］ Press ▲/▼/ / key to select “PRINTED MATERIAL”...

  • Page 27: Printing On The Tube (Pitch Print)

    BASIC OPERATION 4-1 PRINTING ON THE TUBE (PITCH PRINT) Printing the following contents on the tube. Tube size=φ3. 2 mm Pitch length= 18mm X1005 X1006 X1007 1pcs. 5pcs. 2pcs. 2pcs. 2pcs. 18mm 18mm 18mm 18mm 18mm 1. Set “MATERIAL = TUBE” and “SIZE = 3.2mm” in the [PRINTED MATERIAL setting screen]. 2.
  • Page 28 BASIC OPERATION ▲ １ ８ ．０ Ｃ Ｕ Ｔ ０ ０ ３ 7. Input C M . Press BLOCK to create a Ｕ １ Ｃ Ｏ Ｍ new block. Ｔ Ｕ Ｂ Ｅ ３ ．２ ｍ ｍ ＡＵＴＯ ＳＴＤ ＳＴＤ ００５...

  • Page 29: Printing On The Tape

    BASIC OPERATION 4-2 PRINTING ON THE TAPE 4-2-1 PITCH PRINT ON THE TAPE Printing the following contents on the tape. Tape size= 9mm Pitch length=15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 1. Set “MATERIAL=TAPE” and “SIZE=9mm” in the [PRINTED MATERIAL setting screen]. 2.
  • Page 30 BASIC OPERATION ENTER . Set the “START 7. Pressing NUMBER” and “END NUMBER.” ▲ １ ５ ．０ Ｌ Ｉ Ｎ Ｅ ０ ０ ２ 8 in the “START.” Input 1 １ Ｓ Ｌ Ｄ Ｘ Press ▼ key to set the “END NUMBER.” D in the “END.”...

  • Page 31: Normal Print On The Tape

    Printing the following contents on the tape. MAX LETATWIN 12mm LM-550A/PC 40mm 1. Set “MATERIAL=TAPE” and “SIZE=12mm” in the [PRINTED MATERIAL setting screen]. 2. [INPUT screen] appears. Make sure that the arrow symbol “▲” is indicating “A” = capital letters.
  • Page 32 Ｔ Ａ Ｐ Ｅ １ ２ ｍ ｍ ３．０ ＳＴＤ ＳＴＤ ００１ Input SPACE SHIFT → A A SHIFT → F 7. Press PRINT to start printing. (See 7: PRINTING) 8. The printed result is as shown below. MAX LETATWIN LM-550A/PC...

  • Page 33: Inputting And Deleting Characters

    INPUTTING AND DELETING CHARACTERS INPUTTING AND DELETING CHARACTERS 5-1 INPUTTING CHARACTERS 1. To input the capital letter “A.” Press A/a and make sure that the arrow symbol “▲” is indicating “A” = capital letters. － Press 2. To input the small letter “a.” Press A/a and make sure that the arrow symbol “▲”...

  • Page 34: Inputting Characters With "Code" Function

    INPUTTING AND DELETING CHARACTERS 5-3 INPUTTING CHARACTERS WITH “CODE” FUNCTION ･ Using the “CODE” function, you can input the characters according to the following table. (When English is selected as the screen language.) [ The Table of Code ] Code “...

  • Page 35: Inputting Characters With "Diacr" Function

    INPUTTING AND DELETING CHARACTERS 5-4 INPUTTING CHARACTERS WITH “DIACR” FUNCTION ･ Using the “DIACR” function, you can input the diacritics for European languages. (When English / German / French / Italian / Spanish / Polish / Russian / Turkish is selected as the screen language.) [ The Table of Diacritics for European languages ] Ą...

  • Page 36: Functions

    FUNCTIONS FUNCTIONS The following table shows the setting items and their default values. SETTING ITEM DEFAULT VALUE SETTING ITEM DEFAULT VALUE Printed material MAX tube Sequence No setting Size of printed material No setting Justification CENTER Character size AUTO: ON 6, 9 mark (6 9) Character width...

  • Page 37: Width

    FUNCTIONS Note: ● Only when the “AUTO” is selected to “OFF”, the size setting is available. ● The selectable “CHARACTER SIZE” varies depending on the size of the material, the “PITCH LENGTH” and the number of lines, etc. ● When the “AUTO” is selected in the “CHARACTER SIZE”, the character sizes change automatically, depending on the size of material, pitch length and the number of lines in each block.

  • Page 38: Character / Line Space

    FUNCTIONS 6-3 CHARACTER / LINE SPACE Setting the “CHARACTER / LINE SPACE” for the document. Selectable items: “CHARACTER SPACE” = STD (STANDARD), CLS (CLOSE), CNT (CONTACT), WID (WIDE) “LINE SPACE” = STD (STANDARD), CLS (CLOSE), WID (WIDE), CNT (CONTACT) A B C Line space C D E Character space...

  • Page 39: Pitch Print

    FUNCTIONS 6-4 PITCH PRINT [PITCH PRINT MODE] on the top of the document means that LM-550A/PC is in the [PITCH PRINT MODE]. By deleting the , it switches to the [NORMAL PRINT MODE]. (See 6-5: NORMAL PRINT) NORMAL PRINT MODE PITCH PRINT MODE ▲...

  • Page 40: Pitch Length

    FUNCTIONS 6-4-1 PITCH LENGTH Setting the “PITCH LENGTH” at the cursor position. Setting range: “Tube” = AUTO or 10.0～60.0mm, “Tape”, “ID Plate” = AUTO or 4.0～60.0mm ▲ ２ ０ ． ０ Ｃ Ｕ Ｔ ０ ０ １ 1. Press / key to move the cursor under Ａ...

  • Page 41: Normal Print

    FUNCTIONS 6-5 NORMAL PRINT [NORMAL PRINT MODE] In the [NORMAL PRINT MODE], the pitch print function is not available. In this mode, the maximum total printing length is 300mm. Deleting in the [INPUT screen]. NORMAL PRINT MODE PITCH PRINT MODE ▲...

  • Page 42: Vertical

    FUNCTIONS 6-6 VERTICAL Setting to print the texts in the vertical orientation. Selectable items: YES (vertical), NO (horizontal) Note: The printed result varies depending on the selected “PRINT MODE.” You can select “PRINTING DIRECTION” according to the following table. PRINT MODE MATERIAL HORIZONTAL VERTICAL...

  • Page 43: Sequence

    FUNCTIONS 1. Press RPT . The [REPEAT setting screen] ▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １ Ａ Ｂ Ｃ appears. Ｒ Ｅ Ｐ Ｅ Ａ Ｔ ＝ ２ Ｐ Ｃ Ｓ 2. Press / key or Ten key to input the value of the ▲...

  • Page 44: Frame

    “SEQUENCE” settings are automatically cancelled except for the first “SEQUENCE” setting. 6-9 FRAME Setting to frame a document. This function allows you to surround the text with a frame. LM-550A/PC LM-550A/PC Selectable items: NO, STANDARD, CLOSE, WIDE → 1. Press SHIFT (FRAME).

  • Page 45: Symbol

    SUBSCRIPT, ELECTRICAL INSTALLATION ①～③, ITALIC, GREEK, UPPER CASE RUSSIAN and LOWER CASE RUSSIAN Note: “LARGE RUSSIAN” and “SMALL RUSSIAN” can be displayed in the LM-550A/PC A12-C, A11, BS, C72, IND,SASO and CE, when the screen language is English. Please check the model of your LM-550A/PC.

  • Page 46: Registration Of Word

    FUNCTIONS 6-11 REGISTRATION OF WORD Up to 30 words can be saved in the internal memory. Up to 15 characters can be included in a word. Note: cannot be saved. 1. Press SHIFT → WORD . ▲ ２ ０ ．０ Ｃ...
  • Page 47 FUNCTIONS [RECALL] Recalling the saved “WORD.” 1. Select “RECALL”. And then press ENTER . ▲ ２ ０ ．０ Ｃ Ｕ Ｔ ０ ０ １ ［ Ｍ Ｅ Ｍ Ｏ Ｒ Ｙ Ｏ Ｆ Ｗ Ｏ Ｒ Ｄ ］ Ｒ Ｅ Ｃ Ａ Ｌ Ｌ 2.

  • Page 48: Image

    FUNCTIONS 6-12 IMAGE Press SHIFT → OPTION (IMAGE). Previewing a document to get the following information about tubes and tapes before printing. 1) Total print length 2) Preview of the document ▲ key: Temporarily stops the “IMAGE” scroll. key: Increases the scroll speed. key: Reduces the scroll speed.

  • Page 49: Printing Density

    FUNCTIONS 6-13-1 PRINTING DENSITY Adjusting the “PRINTING DENSITY.” When you need to print darker or clearer, adjust it to higher level. When the ink ribbon adhered to the TUBE or TAPE, adjust it to lower level. By pressing / key, increase or decrease the density level. Press ENTER to register the density level.

  • Page 50: 6, 9" Mark

    FUNCTIONS 6-13-4 “6, 9” MARK Setting the printing style of 6 and 9 for a document. After selecting the item by pressing ▲/▼ key, press ENTER to register the setting. Selectable items: (6 9), (6_ 9_), (6. 9.) ［ ６ ． ９ Ｍ Ａ Ｒ Ｋ ］ （...

  • Page 51: Auto Power-Off

    FUNCTIONS 6-13-7 AUTO POWER-OFF Setting the “AUTO POWER- OFF”. After selecting the item by pressing key, press ENTER to register the setting. ［ Ａ Ｕ Ｔ Ｏ Ｐ Ｏ Ｗ Ｅ Ｒ － Ｏ Ｆ Ｆ ］ Ｙ Ｅ Ｓ Ｎ...

  • Page 52: Justification

    FUNCTIONS 6-13-10 JUSTIFICATION Setting the “JUSTIFICATION” for a document in the [NORMAL PRINT MODE]. Note: ● This setting is only applied to the [NORMAL PRINT MODE]. ● The character arrangement in the [PITCH PRINT MODE] is always “CENTER.” After selecting the item by pressing ▲/▼ key, press ENTER to register the setting. Example: Selectable items: LEFT, CENTER, RIGHT LEFT...

  • Page 53: Lcd Brightness

    FUNCTIONS 6-13-12 LCD BRIGHTNESS Adjusting the “LCD BRIGHTNESS.” When the screen is not visible enough, adjust the “LCD BRIGHTNESS” level. key, increase or decrease the “LCD BRIGHTNESS” level. By pressing / Press ENTER to register the “LCD BRIGHTNESS” level. ［ Ｌ Ｃ Ｄ Ｂ...

  • Page 54: Register Basic Setting

    FUNCTIONS 6-13-14 REGISTER BASIC SETTING Register the basic printinting settings which can be applied when selecting the corresponding printed material. Up to 6 combination patterns can be registered. 1. Select “REGISTER BASIC SETTING” from “ADVANCED SETTING”. 2. Select “No.1” to “No. 6” with ▲/▼, and register in the order of “PRINTING DENSITY”, “POSITION OF PRINTING LINE”, and “CUTTING POSITION”.

  • Page 55: Copy / Paste

    FUNCTIONS 6-14 COPY / PASTE Copying a block in the document and pasting it to the cursor position. The setting value (size, character width, repeat and sequential number) of a block can also be copied and pasted. 6-14-1 COPY ▲ ２...
  • Page 56 FUNCTIONS 2. Press / /▲/▼ key to select a desired item and press ENTER . Selectable items: RECALL, SAVE, DELETE, INITI. (INITIALIZE) [SAVE] Saving the created document in the selected file No. ［ Ｓ Ａ Ｖ Ｅ ］ Ｆ Ｉ Ｌ Ｅ Ｎ...

  • Page 57: Usb Memory (External Memory)

    ● The “LMF” data can be edited by MAX original application software “LETATWIN PC EDITOR” for Windows® personal computer. (See 8: EDITTING DATA IN PERSONAL COMPUTER) 1. Insert the USB memory into LM-550A/PC. (See 3-5: INSERTING THE USB MEMORY) 2. Press USB MEM. . The [USB MEMORY setting ［...
  • Page 58 8 alphanumeric characters. Selects “LMF” or “CSV.” Displays the extension. (File format) LMF: ● This is an original extension for LM-550A/PC. All contents of the document and setting are saved. ● To edit the file with “LETATWIN PC EDITOR” in a personal computer, the file must be saved as “LMF”...

  • Page 59: Printing

    END NO. = The last block to be printed. (The function of “COPIES”) LM-550A/PC can print multiple copies of the created document. If “2” is entered in “COPIES”, the machine prints 2 sets of the same document automatically. 2. Press / key or Ten key to input the desired number as the “COPIES “, “START NO” and the “END NO.”...

  • Page 60: Printing Length Alignment

    PRINTING 7-2 PRINTING LENGTH ALIGNMENT Adjusting the total printing length. The total printing length of tubes or tapes can be adjusted. Setting range: -30 to +30mm Default value: 0mm ［ Ｐ Ｒ Ｉ Ｎ Ｔ Ｌ Ｅ Ｎ Ｇ Ｔ Ｈ ］ [PRINTING LENGTH ALIGNMENT...
  • Page 61 PRINTING EDITING DATA AND PRINTING BY A PERSONAL COMPUTER LM-550A/PC features USB port for direct connection with Windows® personal computer, as well as USB memory slot for off-the-line data exchange with Windows® personal computer. USB memory USB cable 8-1 INSTALLING “LETATWIN PC EDITOR” AND PRINTER DRIVER TO A...

  • Page 62: Installing The Printer Driver

    2. Insert the included CD-ROM into the computer. 3. Connect the LM-550A/PC to the computer with USB cable, then turn it on. Select printed material. 4. Press OPTION . The [PC connection / OPTION setting screen] appears.
  • Page 63 PRINTING 7. Press / key to select “YES”. Ｄ Ｅ Ｌ Ｅ Ｔ Ｅ Ｉ Ｎ Ｐ Ｕ Ｔ Ｔ Ｉ Ｎ Ｇ Ｆ Ｉ Ｌ Ｅ Ｙ Ｅ Ｓ Ｎ Ｏ 8. Press ENTER . 9. The following message is displayed, which shows ［...

  • Page 64: Editing Data On A Personal Computer

    With using USB cable connection and “LETATWIN PC EDITOR” for Windows® personal computer, the edited document can be directly printed. 1. Connect the LM-550A/PC with a personal computer with USB cable. 2. Press OPTION . The [PC connection / OPTION setting screen] appears.
  • Page 65 PRINTING With using USB cable connection and “LETATWIN PC EDITOR” for Windows® personal computer, the edited document can be directly saved in the LM-550A/PC. 1. Connect the LM-550A/PC with a personal computer with USB cable. 2. Press OPTION . The [PC connection / OPTION setting screen] appears.

  • Page 66: Trouble Shooting

    TROUBLE SHOOTING TROUBLE SHOOTING 9-1 ERROR MESSAGE LIST Error message Contents Countermeasure OVER INPUT Number of characters input has Characters more than 5,000/file CHARACTER NO. exceeded 5,000 characters/file. cannot be input. Number of lines of the document The maximum lines are 4 lines. OVER INPUT LINE NO.
  • Page 67 TROUBLE SHOOTING Error message Contents Countermeasure NUMBER There are no odd numbers in the Reset the start and end values or WITHIN THE RANGE set serial numbers. select [ALL]. NO EVEN NUMBER There are no even numbers in Reset the start and end values or WITHIN THE RANGE the set serial numbers.
  • Page 68 Use another USB memory or delete OVER CAPACITY available space. unnecessary files to create space. Attempted to read a file which is CANNOT RECALL LM-550A/PC can only read files of compatible with “CSV” file format or “LMF” file format. THIS FILE LM-550A/PC.

  • Page 69: Troubleshooting

    1) The screen does not turn on. 2) The screen is dark (or too connected to the wall socket, the adapter and the light) LM-550A/PC.  The optimum screen brightness depends on the ambient temperature. Adjust it in OPTION menu. 2. When printing on the tube: ...
  • Page 70  Check that the USB cable has been securely connected Cannot access LM-550A/PC from “LETATWIN between LM-550A/PC and a computer.  Check that the “LETATWIN PC EDITOR” and the driver is PC EDITOR” on a personal computer. properly installed.

  • Page 71: Product Specifications

    PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS ITEMS CONTENTS Dimensions 295(W)x293 (D)x94(H)mm Weight 2.4Kg Printing method Thermal transfer method (300 dpi) Display LCD dot matrix: 64 X 160 pixel (Backlit) 40.0mm/s (Standard) Printing speed 20.0mm/s (Low temperature mode) Tube:20m, Tape: 5m Maximum printing length Tube:100m, Tape: 7m （Multiple copies）...
  • Page 72 PRODUCT SPECIFICATIONS FCC Notice (Class B : LM-550A/PC A11) Note : This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 73: Appendices

    APPENDICES APPENDICES RUSSIAN...

Table of Contents