Advertisement
Operation Instruction
The call with handsfree
• Ear plug of handsfree into ear jack of handset to the full.
• Put a handset into handsfree.
• Fix "Handsfree/Ear Mic" switch to "Handsfree" mode.
When released from the factory, it is to be fixed at Handsfree mode.
• When there is an incoming call,
- With Receiver/End/Redial switch pressed the call is connected.
- Open the flip of the handset
- Press any button on the handset.
• To make outgoing call, press a desirable number on the handset,
and then press either the "send" button on the handset or "Receiver/
Transmitter/ Redial" switch on the remote control to talk through
microphone and speaker of handsfree.
• If the call is complete, press either "Receiver/End/Redial" switch on
remote control or "End" button on the handset.
• In case of pressing "Receiver/End" switch on remote control,
the last call number is redialed. (Some models don't work on the function)
• If there is something howling amidst telephone communication,
the volume is to be adjustable.
How to adjust the volum e
• It's good to adjust during communication.
- If push back the handle of a remote control, the volume gets
higher step by step. ( It's adjusted to the number of pushing back.)
- If pull forward the handle of a remote control, the volume gets
lowered step by step. (It is adjusted to the number of pulling forward.)
!
Notice!! Volume is adjustable to the 12 steps.
6
Operation Instruction
Part Name
Speaker
Holder for
handset
Handsfree LED
( Light off
at Ear Mic Mode)
Changeover switch
of "Handsfree/ Ear
Mic"
The call with Ear Microp hone
• It is for privacy call from others in a car.
• Plug ear microphone(headset) in ear microphone jack, and one press
"Handsfree/ Ear Mic" switch. It's switched to Ear Mic mode with
handsfree LED light off.
Ear Phone
Jack
Higher
Switch for adjusting the volume
Transmitter switch
Lower
7
Plug for connection
to handset
Mic Jack
Charger jack
Power supply jack
for DC adaptor
(12~24V)
Advertisement
