Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ekselans CM 4HD-IP
- Page 1 CM 4HD-IP 082008 HD digital modulator-IP streamer 4 HDMI-IP User’s Manual...
-
Page 3: General Description
1 CM 4HD-IP – USER’S MANUAL 1.1 General Description Number Description HDMI Inputs. Connection to the audio/video power supply LED status of the inputs. Shall blink in green when the HDMI are connected RJ45 Connector. IP output... -
Page 4: Installation And Wiring
2. Installation and wiring 1. Fasten the digital encoder-modulator module to a wall frame (CHM TR) or a rack chassis (CHR TR). To this end assemble on the upper rear part of the module the supplied metal part, as is shown in the picture 2. -
Page 5: Main Screen
3. Software Programming: CM management The "CM management" programming software enables the programming and running of all modules of the CM headend. The program is available only for Windows operating system (XP version 7 and above). Once downloaded from the website www.ekselansbyits.com, Documentation >> Software section, having previously run the program with the PC connected to the USB port of the FA 524 power supply. - Page 6 Number Button Function Once connected the PC to the FA 524 power supply through the USB-USB cable, press this button in order for the power supply to identify the modules connected to it. Once activated, the blue logo is displayed This icon will be displayed in blue with white lettering once the connection is established with the headend.
- Page 7 3.2. Programming of the CM 4HD-IP module Once the CM 4HD-IP module is connected to the FA 524 power supply, this in turn to the PC and the "CM management" programme open, select the CM 4HD-IP which is represented as follows:...
- Page 8 In order to program the module, connect in the first place the audio/video sources which are wished to be connected to the HDMI connectors of the CM 4HD-IP module. Each HNMI input can be assigned a set of values, such as: ...
- Page 9 Depending on which column is selected the service will appear in either output stream. At the top right of the window one can set the IP output parameters: MAC Address: MAC (media access control address) address of the module ...
-
Page 10: Saving And Loading A Configuration
3.2.2 Saving and loading a configuration The "CM management" software enables saving on the PC the transmodulator for subsequently uploading to another CM 4HD-IP module. Its running is carried out using the following two buttons, available in the vertical menu on the right: Save on the PC a programming configuration of a module to be subsequently loaded. - Page 11 3.3.1 Access and remote programming of the CM 4HD-IP module It is possible to remotely access a CM 4HD-IP module. To do so it must be connected to the FA 524 power supply and this in turn to the Internet.
- Page 12 Upon the first connection the software's ID and a password must be specified. These are personal and non-transferable. In order to make use of same, please contact your Ekselans distributor so that it may be supplied. Once available, enter the password on the top part of the previous screen (Software ID and Password).
-
Page 13: Technical Specifications
4 Technical specifications Reference CM 4HD-IP Code 082008 Inputs Number of inputs 4 x HDMI Video resolution mode 720 p - 1080p Video compression H.264 - BIRATE 5-15 Mb/s Sample rate audio HDMI (32 kHz/ 44.1 kHz/48 kHz) Audio compression... - Page 14 Ekselans by ITS is a registered trademark of ITS Partner (O.B.S.) S.L. Av. Corts Catalanes 9-11 08173 Sant Cugat del Vallés (Barcelona) www.ekselansbyits.com...
Need help?
Do you have a question about the CM 4HD-IP and is the answer not in the manual?
Questions and answers