Appendix 1 Troubleshooting - CNET CWP-905 User Manual

Appendix 1. Troubleshooting
P
R O B L E M
None of the LEDs turn on when I
insert the WLAN card.
I cannot access the configuration
utility
I cannot connect to a wireless
network
C A
O R R E C T I V E C T I O N
Make sure you have turned on your computer
Make sure you have installed the correct utility and driver for your WLAN
card.
Restart your computer and insert the WLAN card.
Make sure there is no hardware conflict. Check your computer resource
information.
Make sure the WLAN card is inserted properly.
Make sure you have installed the correct utility version.
Make sure the ACT LED on the WLAN card is blinking.
Make sure the wireless router is within range. Move your computer
closer to the wireless router.
Make sure that you have set the wireless network settings correctly. For
example, the SSID and security settings.
Make sure there is no radio interference (for example, cordless phones,
microwave oven, etc) that may affect wireless transmission quality.
25