Subscribe to Our Youtube Channel
Related Manuals for SmartAVI HDMV
Summary of Contents for SmartAVI HDMV
- Page 1 HDMV 4-Port Full HD Multiviewer View four different HDMI video sources simultaneously on one screen. Installation Manual...
- Page 2 HOTKEY AND CONSOLE COMMANDS CONSOLE COMMANDS (cont) AND ACCESSORIES PROGRAMMING THE EDID UPGRADING THE VIDEO FIRMWARE Q & A PART NO. QTY DESCRIPTION HDMV 4-Port HDMI, Multiviewer Switch with PiP/Dual/Quad/Full modes Power Cord 6ft Power Cable CBLDB906 6ft DB9 Serial RS-232 Cable...
-
Page 3: Technical Specifications
Technical Specifications VIDEO Video Bandwidth Single-link 340MHz [10 2Gbps] Resolution HDTV 480i,480p,720i,720p,1080i,1080p PC Resolution 800 x 600 up to 1920 x 1200 Input Video Signal 1 2 volts Input DDC Signal 5 volts Single Link Range 1080p Format HDMI 1.4 DVI Compliance Single-link DVI-D 2.0 Output Cable Length... - Page 4 Introduction The HDMV Multiviewer Switch allows you to view up to four different high definition video sources simultaneously on one display device. Connections to video sources are managed via HDMI connectors. Advanced viewing options include quad-mode, full- screen mode, and PiP (picture in picture) mode. Use this device to simplify management of multiple sources by controlling them all through a single display.
- Page 5 Applications • Law enforcement • Security Clearance • Hospital and Hospice Care Patient Monitoring • Professional Presentations • Corporate or Educational Presentations • Financial (Remote Servers/User Control) • Call Centers for Technical Support • Industrial (Long-Range Workstation Isolation) • Airport Installations (Air Traffic Control/Passenger Information) •...
- Page 6 The power connection and switch are located at the back of the unit as well as the RS-232 connection and all HDMI and USB inputs and outputs. Connect all peripheral devices first and turn them on before powering on the HDMV. Modes Using the Front Control Panel To switch to Full Screen Mode press the button “FULL”...
- Page 7 To change modes with the OSD simply navigate using the following buttons on the front panel: - Down - Up - Select FULL - Enter To save the settings navigate to the “Save” text and Enter (FULL button). The next time the HDMV is started the current screen mode will load by default.
- Page 8 To restore the factory settings click scroll down to “Factory Reset” and enter. The HDMV will perform a power reset on itself. The position of the OSD can be moved around. Select the “OSD Position” text and press enter. Next use the 1, 2, 3, 4 buttons on the front control panel to move the OSD, where 1 is down, 2...
- Page 9 RS-232 Operation and Console Commands The HDMV may also be controlled via RS-232 commands; this feature requires an RS-232 card installed on your computer or a USB to RS-232 adapter. First connect the RS-232 cable between your PC and the HDMV.
- Page 10 This product is backward compatible with DVI-D and VGA with the appropriate adapter. SmartAVI makes a full line of accessories that can be used to enhance features of this product from giving you remote access via the Internet or extending the range inputs and output over 200 ft, to...
- Page 11 Information pertaining to color depth, resolution, and sound must be properly configured in order for the optimum viewing . To program the EDID first disconnect any inputs to the HDMV and plug a monitor in to the output. Next power the device on.
- Page 12 4) Press “Select Flash Hexfile” and locate the firmware upgrade. (Don’t forget to download the upgrade first.) 5) With the power to the HDMV off, press “Connect to Bootloader” then turn the power to the HDMV on. 6) Once connected click on “Program Flash”...
- Page 13 United States in our North Hollywood, California facility. NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose.
Need help?
Do you have a question about the HDMV and is the answer not in the manual?
Questions and answers