Specifications Optical engine: DLP Brightness: 50lums Lamp: RGB LED, over 20,000 hrs Resolution: 854 x 480 Projection size: 20~100 inches Projection distance: 2~3m Contrast: 1000:1 Screen ratio: 16:9 4:3 Focus: Manual focus OS: Android4.4 CPU: 1.4GHz Built in memory: 8GB WiFi: Support 2.4G BT: Support 4.0 BLE USB and TF card: up to 32GB...
Basic operations 1.Power on: Press ON/OFF key for 3 seconds, the blue light on,then the opening picture comes out. 2.Poweroff:Press ON/OFF key for 3 seconds, the projecting picture will remind you device is shutting down(正在关机). 3.Back: Press ON/OFF key for 1 seconds. 4...
Page 5
Reboot Reboot :Please Press reset button, when abnormal condition occurs. Charging Charging: A power bank or home charge can recharge the device. 5...
Page 6
Display with more devices Simultaneously via wireless -For IOS Series product. Its possible to achieve wireless connection with more devices in same time by using the built-in wireless display function for iphone,ipad & mini projector. Note:Please make cell phone&projector connect the same wifi,then go to step 2 1.
Page 7
2. Finding AIRPLAY in your phone,then choose ESHARE.XXX,open mirror button,finish wireless. 7...
Wireless display in same time For Android Devices Note:Smart phone & android tablet pc should support Miracast function 1、Turn on wifi in two devices,finding WI-FI display in mini projector as following. 2、 Starting up your cell phone or tablet with, setting-display-wireless display or screen share &...
Page 9
Wireless display with computer Install EScreen.exe software,opening as following making two devices connect with same wifi or make laptop connect with the hotspot of the projector. Click search devices,finding relevant equipment then click start mirroring. 9...
FAQ(Fequently Asked Qestion) How to focus Press the focus button on the side of the projector. How to adjust the brightness In setting-display- brightness adjustment. Intermittant black screen Due to outlet obstructions affect the heat dissipation to make the engine overheat result in black screen.
Page 11
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 12
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ...