Declaration of Conformity Declaration of conformity for apparatus with CE mark We hereby declare that the product to which this declaration refers conforms to the following standards. Electronic scale: Physician Scale USA model UK (Europe) model Physician Scale Mark applied...
Customer Service LW Measurements LLC 620 Carlson Court Rohnert Park, CA 94928 Tel: (707) 542-2185 FAX: (707) 542-3285 http://lwmeasurements.com EUROPE LW Measurements Europe Ltd Chalkwell Park House 700 London Road Westcliff-on-Sea Essex SS0 9HQ United Kingdom Tel: 01702-476700 Fax: 01702-477380 http://lwmeasurements.com Rev 2, 10.21.2016...
Introduction What you should know about these Operating Instructions: Tree® Professional Weighing Equipment products are simple to operate. Nevertheless, you should read through these operating instructions in their entirety, so that you can make optimum use of the full potential and the diverse possibilities of the weighing scale in your daily work.
Safety Representations and symbols Important instructions, which involve safety, are highlighted with the appropriate mark: Safety recommendations When using the weighing equipment in surroundings with increased safety requirements, the corresponding regulations must be observed. The weighing scale may only be used with the power adapter supplied. Before connecting the power adapter to the scale, the user must ensure that the operating voltage stated on the power adapter is compliant with the mains voltage.
Weight Scale Construction & Functions The weighing scale consists of the following parts Electronic height ruler Indicator Stand – vertical rod Weighing platform Rev 2, 10.21.2016...
Functions The Physician Scales are high-quality electronic precision weighing scales with counting function and the following specifications Model number Capacity Graduation Weighing pan Size Physician Scale 0-200kg 0.1 kg 13 in x 19 in 0-400lb 0.2lb 330mm x 480 mm 200 cm 0.5cm...
The power adapter supplied for the weighing scale complies with the appropriate electrical protection class. The following applies to the Physician Scale Power supply: 1. Four pieces of D type cell battery and/or 5V form USB can be used.
Getting started The scale is packaged in an environmentally-friendly carton, which provides optimum protection for the balance during transportation. We suggest that you keep the original packaging in order to avoid damage if you are shipping or transporting the scale to a different location. It is also the best way to keep it in the best conditions if it will not be used for an extended period of time.
Assembly & Installation The weighing scale is delivered in a partly dismantled condition. Assemble the individual components in the following sequence: Find the carton with same number mark. Open it, check the number on the height rod, indicator and platform, if they are same, then you can start install.
Page 13
3. Connect the load cell plug. (attention: connect in right direction, with proper force) 4. Use the Allen key to fix the screws which have been taken out before. Then use the white plastic oval cover to cover the screws.
Page 14
5. Make sure the no. on the indicator and platform is same, connect the plugs between indicator and height rod.,(Attention: make sure they are in right direction, with proper force.) 6. Install the indicator according to below picture, insert the extra wire inside the rod., then push down the indicator until you hear clicking sounds, means you have finished the installation for the indicator.
Page 15
7. Use the Philips screwdriver to take off this two screws on the slide rod 8. Put the top lever into the height rod. Make sure the direction is right. Rev 2, 10.21.2016...
Page 16
9. Use the Philips screwdriver to fix the screws which have been taken offer before. 10. Start using it after you finish the installation. Rev 2, 10.21.2016...
Page 17
The following Safety recommendations must be observed when connecting the scale: The Scale should only be connected to the mains voltage socket with the power adapter supplied. Check before connecting the power adapter to the mains socket, that the operating voltage stated on the power adapter complies with the local mains voltage. If the operating voltage is not the same as the mains voltage, the power adapter must not be connected to the mains socket and contact customer service.
6.1) turn on after making sure the batteries and/or USB is in normal working condition, remove if anything on the weighing platform, press “On/Off”to turn on the physician scale, after indicator is on it will display current date and time for about 2 seconds, then it will get in to operation mode, for example, if date &...
Page 19
For setting, during checking mode, press and hold “Date/time” until beeper sounds then release, year digits flash, press“Date/time” to confirm, month digits flash, press “Date/time” to confirm ,day digits flash, press“Date/time”to confirm, hour digits flash, press “Date/time”to confirm, minutes digits flash, press “Date/time”to confirm, second digits flash, press “Date/time”...
Page 20
6.7) Saving data During operation mode and not in user number 0, BMI reading >10.0, after weight & height reading both stable, “Hold” will display, press Save to save data, “Save” will display, it means data is saved, once user leave the platform, it returns back to operation mode.
Page 21
6.11) delete last record of specific user During operation mode, use “▲/Up or ▼/Down” to choose user number, press and hold “Zero” until “dEL LASt”displayed, the last record of the chosen user is deleted. 6.12) Delete all records of specific user During operation mode, use “▲/Up or ▼/Down”...
Trouble Shooting problem Possible cause solution Not start Bad battery Change battery or use USB Loose date/time Weak battery Change battery flashing Weak battery Change battery 1)not zero before use 1)set zero before use Inaccurate weight 2)not calibrated correctly 2)recalibrate with standard test weights 1)not zero before use 1)pull down ruler to bottom and reset zero Inaccurate height...
Maintenance & Service The weighing scale is a precision instrument, it must be treated carefully and cleaned regularly For maintenance-work, the balance must be disconnected from the power supply (remove power adapter plug from socket). Also ensure that the balance cannot be connected to the power supply during the work by a third party.
Warranty The products are under warranty against factory defects for a period of two (2) years from the date of shipment. For Customers within the lower 48 states of the continental United States. LW Measurements will pay for fright both ways for the first 30 days after purchase. After 30 days expire the customer is responsible for shipping the product back to us.
Need help?
Do you have a question about the Physician Scale and is the answer not in the manual?
Questions and answers