Coopers of Stortford 10921 Instructions For Use

Mini heater

Mini Heater

Please read and retain these instructions for future reference

PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

TECHNICAL DETAILS:

POWER DETAILS:

POWER FREQUENCY:

WATTAGE:

UNIT SIZE:

THIS PLUG IN MINI HEATER CAN BE USED WITH A RCD (RESIDUAL CURRENT DEVICE) PLUG.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CONNECT DIRECTLY TO A WALL OUTLET.

POTENTIAL ELECTRICAL HAZARD IF INSTRUCTIONS NOT ADHERED TO.

DO NOT USE WITH AN EXTENSION CORD. RISK OF FIRE OR ELECTRIC SHOCK IF THIS HEATER DOES

NOT SIT VERTICALLY UPRIGHT.

10921

240V a.c.

50Hz

400W

4.96in.(W) x 3.31 in.(D) x 6.22 in.(H)/12.6cm(W) x8.41cm(D) x15.8cm (H)

Instructions for Use

v002: 24/10/17

Table of Contents

Do you have a question about the 10921 and is the answer not in the manual?

Page 1 Mini Heater Instructions for Use 10921 Please read and retain these instructions for future reference v002: 24/10/17 PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. TECHNICAL DETAILS: POWER DETAILS: 240V a.c. POWER FREQUENCY: 50Hz WATTAGE: 400W UNIT SIZE: 4.96in.(W) x 3.31 in.(D) x 6.22 in.(H)/12.6cm(W) x8.41cm(D) x15.8cm (H) THIS PLUG IN MINI HEATER CAN BE USED WITH A RCD (RESIDUAL CURRENT DEVICE) PLUG.
Page 2 Mini Heater Instructions for Use 10921 Please read and retain these instructions for future reference v002: 24/10/17 USER INSTRUCTIONS: (photos are for illustration only) 1. Plug the Mini Heater into desired 240V power outlet. Please note the location of the plug pin moulding is 10cm from the base of the heater when selecting suitable wall socket.
Page 3 Mini Heater Instructions for Use 10921 Please read and retain these instructions for future reference v002: 24/10/17 Setting the Timer Mini Heater has a built-in timer that will automatically turn the unit off after a set amount of time. 1. While the Mini Heater is plugged in and turned on, press the “Timer Button”...
Page 4 Mini Heater Instructions for Use 10921 Please read and retain these instructions for future reference v002: 24/10/17  DO NOT ALLOW FOREIGN OBJECTS TO ENTER OR BLOCK ANY VENTILATION OR EXHAUST OPENING AS THIS MAY CAUSE ELECTRIC SHOCK, FIRE, OR DAMAGE THE HEATER.