Advertisement
PORTABLE CARBON MONOXIDE DETECTOR PRODUCT MANUAL
WARRANTY:
The Inspector has a one year warranty on all of its parts. It is recommended that you calibrate the Inspector every six
months. If you do not calibrate it then there is a good chance it will not provide an accurate measurement. If a calibration
is never performed an EOL (End of Life) icon will display on the LCD after two years of use. A successful calibration
postpones an EOL for 180 days.
NORMAL OPERATING CONDITIONS:
Temperature: -20oC to +50oC (-4 F to +122 F)
Humidity: 20-90% R.H (0-99% intermittent)
PRACTICAL CONSIDERATIONS:
Short term measurements (i.e. <1hr) in any humidity (0-99% R.H.) are fine as long as condensation does not block the
sensor inlet. A longer term exposure to extreme humidity outside the normal range can cause damage to the sensor.
Damage occurs much faster at higher temperatures. The LCD display and sensor will not work properly at lower
temperatures. NOTE: Higher temperatures can damage the device.
PLEASE NOTE:
Do you know if there is Carbon Monoxide in the air? The Carbon Monoxide Inspector is a professional grade tool that will
answer that question. Carbon Monoxide is a toxic and odorless gas that is produced from most combustion processes.
This includes furnaces, car exhaust and burning cigarettes.
Thank You for choosing The Sensorcon Carbon Monoxide Inspector! We want to be your go to company for all your
professional needs! Please feel free to contact us with any comments, questions or concerns and we'll do our best to
make sure you're 100% satisfied.
CONTACT INFORMATION:
150 N. Airport Drive Buffalo, NY 14225
Office: (716) 566-2728 Fax: (716) 276-3047
sales@sensorcon.com
www.sensorcon.com
CUSTOMER SERVICE HOURS OF OPERATION:
Monday through Friday: 8am to 4pm
Please Note: East Coast Time Zone
Front View
Side View
Rear View
150 Airport Drive Buffalo, NY 14225
Office: (716) 566-2728
Fax: (716) 276-3047
sales@sensorcon.com
www.sensorcon.com
Page 1
Advertisement
Table of Contents
Summary of Contents for Sensorcon CO Inspector
- Page 1 This includes furnaces, car exhaust and burning cigarettes. Thank You for choosing The Sensorcon Carbon Monoxide Inspector! We want to be your go to company for all your professional needs! Please feel free to contact us with any comments, questions or concerns and we’ll do our best to make sure you’re 100% satisfied.
- Page 2 LCD DISPLAY LAYOUT CARBON MONOXIDE INSPECTOR QUICKSTART GUIDE 150 Airport Drive Buffalo, NY 14225 Office: (716) 566-2728 Fax: (716) 276-3047 sales@sensorcon.com www.sensorcon.com Page 2...
- Page 3 (CO) is sensed. The gas concentration is displayed in parts per million (PPM). Please Note: The Sensorcon Inspector is a professional tool. It does not require very much maintenance with the exception of keeping it clean. This is especially important in the area of the sensor inlet. If it gets dirty then simply wipe it clean with a damp cloth or with a damp cotton swab.
- Page 4 USA. In addition to this, you can easily purchase our products directly from the Sensorcon online store. Whether its portable single gas meters to detect carbon monoxide in your home or complex PCB and sensor integrations into industrial networks.
Need help?
Do you have a question about the CO Inspector and is the answer not in the manual?
Questions and answers