Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Aukey VT-CM1
-
Page 1: User Manual
User Manual Wireless IP Camera... -
Page 2: Package Contents
Introduction Hi. Thank you for purchasing the AUKEY VT-CM1 Wireless Security IP Camera. Please read this user manual carefully and keep it in a safe place for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number. -
Page 3: Specifications
Getting Started Insert micro SD card into the camera. Connect one end of the included Micro USB cable to the Power Port of VT-CM1 and the other end to a USB charger. Plug into a wall socket. - 02 -... -
Page 4: Mount The Camera
Click “+” on the upper left to add device. Option 1: Select “Manual input device ID”. Enter ID and password found at the bottom of the VT-CM1. Option 2: Scan the QR code at the bottom of the VT-CM1. - 03 -... -
Page 5: Wireless Connection
Wireless Connection Networking mode Wi-Fi Prerequisites Wi-Fi connection Your device is not online,please select the networking mode Smart Wi-Fi Setup No Ethernet cable needed Please press RESET button 1 second and Sound is helpful for Wi-Fi connection please keep the phone speaker close to then take off,after listen the voice hint,WI- the camera’s mic FI lights start flashing in red and green,see... -
Page 6: Wired Connection
Wired Connection Connect camera to your network with the included Ethernet cable. Networking mode Ethernet connection Modify password Device ID :1jfiegbp3fzxq Your device is not online,please select the networking mode Your device in not online,please check the Device ID :1jfiegbp3fzxq Your password of device is too simple, device’s line connection. -
Page 7: Main Interface
Main Interface Voice Control 127KB Turn on/off the microphone and speaker Two-way Audio Press icon to speak from mobile device W E O N E S O A Y 2 0 1 6 - 1 0 - 1 2 1 4 : 4 5 : 1 9 Snapshot Tap icon to take a photo Video... -
Page 8: Customize Your System
Customize Your System Settings Model, version and device ID About Nickname Device admin password Device guest passeord Network Set up Wi-Fi connection SD card Check available and used storage Storage Device Motion and Notification Set alarm for motion detection Schedule alerting Schedule recording Set recording start and end time Day/Time... - Page 9 4. Select Wi-Fi Network and enter password 5. Device is added successfully *Wireless Network Indicator will flash green 3 times every 3 seconds once successfully connected. Note: ID and password can be found on the bottom of VT-CM1. Main Interface ● Device ID :1jfiegbp3fzxq...
-
Page 10: Product Care
Amazon CA orders: support.ca@aukey.com Amazon JP orders: support.jp@aukey.com *Please note, AUKEY can only provide after sale service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.
Need help?
Do you have a question about the VT-CM1 and is the answer not in the manual?
Questions and answers