Advertisement
Thank you for choosing the Mobile Broadband USB
Dongle. With your USB Dongle, you can access high
speed mobile broadband.
Note:
This manual describes the appearance of the USB Dongle, as well as the steps for
preparation and connection.
Getting to Know Your USB Dongle
The following figure shows the USB Dongle. It is provided only for your reference.
The actual product may be different.
1
2
USB Connector
It connects the USB Dongle to a PC.
Indicator
It indicates the status of the USB Dongle.
Green, blinking twice every 2s: The USB Dongle is powered on.
Green, blinking once every 0.2s: The software of the USB Dongle is being
upgraded.
Green, blinking once every 2s: The USB Dongle is registering with a 2G network.
Blue, blinking once every 2s: The USB Dongle is registering with a 3G/3G+
network.
Cyan, blinking once every 2s: The USB Dongle is registering with an 4G network.
Green, solid: The USB Dongle is connected to a 2G network.
Blue, solid: The USB Dongle is connected to a 3G network.
Cyan, solid: The USB Dongle is connected to a 3G+/4G network.
Off: The USB Dongle is removed.
SIM Card Slot
Holds the SIM (Subscriber Identity Module) card.
microSD Card Slot
Holds a microSD card.
Getting Your USB Dongle Ready
1. Slide the cover to remove it from the USB Dongle.
2. Insert the SIM card into the corresponding card slots, as shown in the following
figure.
3. You can insert a microSD card to add USB memory stick functions to your dongle.
4. Replace the cover and slide it into place.
3
4
Advertisement
