Table of Contents
Advertisement
Quick Links
DIGITAL CLAMP TESTER
MODEL HCL-3000D
INSTRUCTION MANUAL
Thank you very much for selecting our digital clamp tester
model HCL-3000D for AC leakage/line current in Hi-voltage circuit.
This model is complex instrument and employ a very reliable
mechanical/electronic design.
Before you use your new instrument, read this instruction
manual completely and familiarize yourself thoroughly with
all functions and keep this instruction manual carefully to
take out whenever you need.
MULTI MEASURING INSTRUMENTS CO.,LTD.
Akihabara Murai Bldg., 7F, 1-26 Kanda Sakuma-cho,
Chiyoda-ku, Tokyo, 101-0025 Japan
TEL : 81-3-3251-7016 FAX : 81-3-3253-4278
Home Page :
http://www.multimic.com/
E-mail :
multi@multimic.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Multi HCL-3000D
Summary of Contents for Multi HCL-3000D
- Page 1 MODEL HCL-3000D INSTRUCTION MANUAL Thank you very much for selecting our digital clamp tester model HCL-3000D for AC leakage/line current in Hi-voltage circuit. This model is complex instrument and employ a very reliable mechanical/electronic design. Before you use your new instrument, read this instruction...
- Page 2 1. SAFETY SUMMARY observe by all means ● To use this instrument safely, read this “SAFETY SUMMARY” carefully and apply the instrument correctly. ● The CAUTIONs and WARNINGs which appear on the following pages are stated to prevent the operator & other people from the dangers and their properties from the damages beforehand.
-
Page 3: Specifications
2. SPECIFICATIONS Measuring Method :Dual integration mode Measuring Function :AC Current by clamping CT Display :3.5 digit LCD, max. 1999 count Measuring Range : 0-2000mA/20A (50/60Hz), two range manual Accuracy C±5 C , 80%RH or less Range Resolution Accuracy 2000mA ±2% rdg±8dgt 0.01A Jaw Opening Capability:... - Page 4 3. DIMENSION & PANEL 51.5 ① Clamp CT : CT sensor detecting the current by clamping method. ② Open/Close Guide for CT : Clamping/releasing CT to or from the conductor by pushing /drawing this part. ③ Power Switch : Switch for power on and off. ④...
- Page 5 ● 「B」sign will appear on the display when batteries are exhausted and get less than operation voltage. Replace to new batteries immediately. ● Do not use the batteries mixed new one and once used and or different kind ones. WARNING △...
- Page 6 REPAIR SERVICE When requesting for repair service, please bring the instrument directly to the dealer where you bought. When mailing the instrument, always pack it in its original or equivalent packing materials to avoid any damage during the transportation and also put together with documents showing your name, address, phone number and defect point.
Need help?
Do you have a question about the HCL-3000D and is the answer not in the manual?
Questions and answers