For more information and a full list of current products, please go to www.ultracade.com. The AMP-LC-2 takes audio input from a standard 3.5mm jack plug. The signal is amplified by a 2x36W audio amplifier. The resulting output is available through a standard 4-pin 156mil Molex connector.
Power Power at a nominal rate of +12vdc (not exceeding +18vdc) may be supplied to the AMP-LC-2 PCB from any one of 3 connectors (J1, J4, or J5). This provides a convenient range of connection options. However, it is important that only one of these power sources is connected at any given time.
Need help?
Do you have a question about the AMP-LC-2 and is the answer not in the manual?
Questions and answers