Related Manuals for X Rocker 5107501
Summary of Contents for X Rocker 5107501
- Page 1 User Manual Item no: 5107501 Need Help? Email: Phone: 01274 683 109 IMPORTANT: You must keep your original retail receipt as proof of purchase.
-
Page 2: Table Of Contents
Welcome to X Rocker! Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio! To get started, please assemble the chair using the assembly instructions on the separate leaflet... - Page 3 B1 - 3m 3.5mm to 3.5mm Audio cable B2 - 15cm RCA to female 3.5mm audio cable B3 - RCA female to female adapters B4 - Power supply Cable B7 - Micro USB Cable 0.8m Control panel overview...
- Page 4 Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the front USB ports Step 2: Turn the PS4™ system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair.
- Page 5 Step 1: Make sure that the Xbox One™ system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the back USB ports on the Xbox One™ system. Remove the clear Step 2: Turn the Xbox One™...
-
Page 6: Wireless Connection Guide: Ps4
Wireless connection guide: TV (All systems) Transmitter TV/SPDIF/Optical Socket TV USB socket 1. Connect B6 Optical Cable to the B5 Wirelesss DAC transmitter’s SPDIF Port. 2. Connect other end of B6 Optical Cable to the TV Optical socket. 3. Connect Micro USB Cable to the transmitter and other end to an available USB socket on the TV. -
Page 7: Wired Connection Guide: Tv (All Consoles)
Wired connection guide: TV (All consoles) TV/Mobile/Tablet 1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets. 2. Connect other end of B1 3.5mm end into the headphone socket of your television. 3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level. -
Page 8: Wired Connection Guide: Ps4 Controller Only
Wired connection guide: PS4 Controller only 1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket. 2. Connect the other end of the B1 cable to the chair via the green port. 3. With the PS4 turned on, go to the main menu (or locate the main menu screen). - Page 9 Step 1: Step 2: On the Audio output device turn Bluetooth on if it is not on already and search for XROCKER select the XROCKER If a passcode is required the four digit code will be ‘0000’.
-
Page 10: Troubleshooting Tips
The cables connected to my • Please contact X Rocker support X Rocker have been broken (service@XRockerNation.co.uk) regarding accidentally this issue. -
Page 11: Health And Safety Information
Support for replacements and dispose of these parts safely. • Do not stand on the X Rocker or exceed the 120kg weight limit via other means. • Do not lean back on the chair to the point in which the pedestal would lift off the ground. - Page 12 ATTENTION: A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus; B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;...
- Page 13 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase.
Need help?
Do you have a question about the 5107501 and is the answer not in the manual?
Questions and answers