Do you have a question about the 300K Pixels and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Digimax 300K Pixels
Page 1
1. Do not connect the camera to the computer before the software is installed. 2. Download the Images from camera before the battery discharges, otherwise, the Images will be deleted from the memory. 3. Use good quality alkaline batteries only. DigiMax Camera Installation Guide v1.0...
Page 2
USB cable provided. You can also use the camera with Video Conferencing software so you can see others via the Internet. Electronic Coupling Element: CMOS Sensor 300K Pixels Image Resolution: 1280 x 960 Pixels (SXGA) 640 x 460 Pixels (VGA)
Open dialog box please type in D:\autorun.exe (where D is the drive letter of the CD-ROM drive you are using.) then click on OK. You should then be shown the menu pictured right. DigiMax Camera Installation Guide v1.0 DigiMax Camera Installation Guide v1.0...
Page 4
“Install DC Driver”. This will prompt the InstallShield to begin the installation process. On the next installation screen given click on Next and the installation will continue immediately installing the application as required. DigiMax Camera Installation Guide v1.0...
Camera Operation In order to use the DigiMax Digital Camera it must have a battery inserted and be turned on so that it is in it’s normal working state. If it is in the energy saving mode press the “Function” button once to turn on the camera and the LCD should then display the current Resolution Mode before showing you the number of images you have remaining.
Page 6
Settings you set up. Light System Toggle 1. Press the "Function" button seven times and the LCD will display "60/50"; 2. Press the "Shutter" button within 5 seconds and the shift of 50/60Hz light system can be achieved. DigiMax Camera Installation Guide v1.0...
To close the Window click the cross in the top right hand corner of the screen. iv.) To adjust the Brightness and Contrast click on the Edit Image button. DigiMax Camera Installation Guide v1.0...
2. PCCam - Live View i.) With the DigiMax Camera connected via USB you will need to run the PCCam Application. To access the PCCam Application click on your Windows Start button and then on Programs (this will be called “All Programs”...
Page 9
You can use "Arcsoft PhotoImpression 4.0" software to edit the photo. Please click the button "Camera/Scanner" and then select the camera from the select source options. The DigiMax Camera will be listed as Dual-Mode DSC(2770), then click the Acquire button (this will have a picture of a scanner and a camera on the button).
Page 10
The VideoImpresion will assist you in mastering the editing of your digital video files. Title Screen Allows you to select whether to start a New project or open a currently saved document. DigiMax Camera Installation Guide v1.0...
When Windows XP was under development Microsoft tested all pieces of hardware and software that were available at the time and made a small database in the operating system to tell you if the item passed Logo Testing DigiMax Camera Installation Guide v1.0...
Page 12
USB Digital Still Camera should now be listed as Dual-Mode DSC(2770) as required. You should now be able to use your DigiMax Camera as required. ii.) If the advice in 3.c.1. does not resolve the issue but you find that the “Dual Mode DSC(2770)”...
Page 13
The photos are only downloaded using this application. In order to Print these images you will need to save the pictures (Please refer to section 3.b. regarding this process.) and then open them with the image editing application of your choice. DigiMax Camera Installation Guide v1.0...
Page 14
Page 14 DigiMax Camera Installation Guide v1.0...
Page 15
Page 15 DigiMax Camera Installation Guide v1.0...
Page 16
Page 16 DigiMax Camera Installation Guide v1.0...
Need help?
Do you have a question about the 300K Pixels and is the answer not in the manual?
Questions and answers