Download Print this page

TAIDE ELECTRONICS BT020 User Manual page 3

Advertisement

Music Playback:
AUX Playback: Use the supplied audio cable to connect the speaker to another music player such as computer by
plugging one end to the speaker's AUX port and the other end to the music player's audio port. When the
music player starts playing music, the speaker sounds right away. Tracks can be selected and volume
adjusted only by the music player.
Hints: 3 buttons of, +, and — are functionless in the AUX mode and the volume is controlled by the
music player.
Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before
VIII. Trouble shooting
Faults
Phenomena
Unable to pair up with other
devices
The sound is rather low or distorted
The music stops from time to time
The Bluetooth indicator remains off
Hints:
Another trouble, please consult the dealer or an experienced radio/TV technician for
to start search. All the paired devices will engage in automatic connection when the speaker is
turned on.
When connected, the speaker plays music immediately. Press + and — to select
tracks upwards or downwards. Long press and hold + and — to adjust the volume. While
playing music, press
Hints:
1. Please recharge when the battery loses its power considerably or the connection is
failed.
2. This Bluetooth speaker is required to carry out manual connection when switched
on every time.
recharging, plug the mini-USB end of the supplied USB cable to the speaker's USB port
and the other end to the USB port of the computer or the USB recharger. When fully
recharged, the red indicator goes off.
1.
Check whether the speaker is still in the process of search or switch it off and then
on.
2.
There are too many Bluetooth devices in the proximity that cause difficulty in
connection. Please turn them off.
1.
Check the Bluetooth device's volume and then adjust it to a proper level.
2.
Recharge the battery
1.
Check whether the speaker's effective transmission range is exceeded or there is
an obstacle standing between the speaker and other Bluetooth devices.
1.
It suggests the battery power drops quite low and retry once being recharged.
2.
Turn it on again.
to pause and
to resume.
Solutions
help.

Advertisement

loading