Advertisement
CTC161209(076-5449-4)
ASSEMBLY INSTRUCTIONS
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free
of debris and sharp objects, away from a
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Step 3: Spread the tent
1) Set the tent in desired location.
2) Locate hub, unwrap tent body with hub at bottom.
3) Unfold pole legs as shown.
Step 1: Verify package contents
Tent : 1 each
Rainfly : 1 each
Main Frame with Connector
(pre-attached to the tent) 1 each
(A) Instant Frame 1 each
Tent Stakes : 10 each
Step 4: Raise the tent
1) Hub is attached at centre of tent roof.
2) Extend telescoping roof poles until the snap into place.
3) Unzip door. Step into open doorway.
4) Grasp hub and lift upward extending the telescoping leg poles until they snap into place.
The tent will rise as the leg poles are extended.
5) Make sure all poles are locked.
Step 2: Assemble poles
1) Instant frame is pre-attached to the
tent.
1 each (A) Instant Frame
CTC 161209 05/15
Advertisement
