Date And Time; Security - Nokia 6680 User Manual

data coverage and you select
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use
your phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in Configurations.

Date and time

See 'Clock settings', p. 17.
See also the language settings in 'General', p. 89.

Security

Phone and SIM
PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See 'Glossary of PIN
and lock codes', p. 95.
94 Copyright © 2005 Nokia. All rights reserved.
When available, the phone PIN code, PIN2 code, and Lock
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See 'Glossary of PIN and
lock codes', p. 95.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a time-
out after which the phone automatically locks and can be
used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select
off the autolock period.
To unlock the phone, enter the lock code.
Note: When the phone is locked, calls in offline
profile to certain emergency numbers programmed into
your phone are still possible.
Tip! To lock the phone manually, press
commands opens. Select
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognised as the owner's cards.
code—You can change the
None to turn
. A list of
Lock phone.