Advertisement
Quick Links
Advertisement
Related Manuals for Audipack Communicate
Summary of Contents for Audipack Communicate
- Page 1 Installation manual for the Audipack® “Communicate” Video Conference Furniture...
- Page 2 An Audipack ® Video Conference (VC) Furniture can be shipped in parts or as an assembled model. The manual is covers both version. Mounting the vertical column on the body of the VC-furniture. In the package 3 aluminum columns are included (depending on the model).
- Page 3 Installing the horizontal arms. To install the horizontal arms (suitable for the double screen versions) unpack the arms; be careful not to damage them. Remove the 2 end caps off each arm. When removed two 17 mm bolt heads are visible of the locking mechanism.
- Page 4 Slide the T-clamps into the vertical column. (It is better if you ask for some assistance). Scratching on the vertical column happens easily. When the presentation height of both columns is determined, be sure to align the two columns with each other, and secure them by turning both the 17 mm nuts on the end of both columns.
- Page 5 The horizontal arms are equipped with a mounting head that will be used to install the flat panel monitor. Use the Audipack Uniflatfix Pro to pre-install on the flat panels. Undo the front panel of the mounting head to set the horizontal position or slightly tilt the bracket ad use a 13 mm wrench to unlock the M8 bolts.
- Page 6 Use the 4 smaller screws to set the desired angle of the flat panel monitor.
- Page 7 Installing your equipment. Install your equipment in the base of the furniture. Power cables etc. can be installed through the cut out in the back. Assembling and mounting the (optional) conference camera stand. With the camera stand you can install a camera on 5 different positions.
- Page 8 Set the position by fastening the knobs on the back. The height of the plateau can be adjusted with the big knob on the back of the stand. With this knob you can also release the complete plateau, and put it in a horizontal or vertical way.
- Page 9 The Camera Drawer. The models P3916 and P3917 are equipped with a camera drawer. The drawer can be opened by pushing gently at the top of the drawer, then the ‘push-to- close’ lock will open, and the drawer opens up. In this drawer are 4 screws.