Contents Introduction ..................................100 Safety instructions ................................. 101 Specifications ................................. 103 Machine description ............................... 104 Machine functions and operation ..........................106 Switching the machine on/stand-by ..........................106 Filling the cold water tank ..............................106 Coffee pack replacement ..............................107 Delivery of a cup of coffee ..............................108 Delivery of a pot of coffee ..............................
Introduction In this user manual you will find instructions and explanations concerning machine functions, operation and maintenance. The machine is designed to deliver coffee and hot water, either in cups, mugs or in a pot. Operation is simple and its straight-forward design warrants convenience in every aspect.
Safety instructions Operation Installation, programming and adjustments must be performed Note that the drip tray capacity is limited to 250 ml / 8 oz (1~ 2 by a service technician or other authorized personnel. cups). Please empty the drip tray regularly or if coffee or water Do not remove machine covers for safety reasons.
Page 6
Product storage Electrical safety Ensure that the cooling compartment is properly closed at all Never immerse the power cord or the machine in WARNING water or any other liquid. times. The coffee quality may otherwise deteriorate. Store defrosted product packs only in a refrigerator at a Never plug a power cord into a wall outlet (or WARNING unplug a power cord) when either part is wet or...
Specifications Machine Size (H) 568 mm / 22.4’’ x (W) 365 mm / 14.4’’ x (D) 350 mm / 13.75’’ Weight 12 kg / 26,4 lbs (19 kg / 42 lbs with water and coffee pack) Outlets Hot water (left) and coffee (right) Cup volume Adjustable (20 ~ 400 ml / 0.6 ~ 13.5 oz) Delivery time...
Machine description Cold water tank lid Cold water tank Cold water level window with indication Drip tray Cup grille Coffee outlet Hot water outlet Operation panel Cooling compartment door Cooling compartment Coffee pack Cooling comp. temperature high indicator Power on / stand-by indicator On / Stand-by switch...
Page 9
HOT WATER COFFEE REPLACE COFFEE PACK REFILL WATERTANK stop WARMING UP, PLEASE WAIT Operation panel 1. Coffee empty - indicator 2. Cold water tank empty - indicator 3. Boiler temperature low - indicator 4. Hot water button 5. Coffee (cup) button 6.
Machine functions and operation Switching the machine on/stand-by Filling the cold water tank 4. Please do not overfill the water tank. Press the switch to switch the machine on or (not applicable for machines with a fixed Allow excess water to flow out stand-by (fig.1).
Coffee pack replacement When the ‘replace coffee pack’ indicator 6. Take a new coffee pack and inspect 8. Place the new coffee pack in the cool- lights: ing compartment. the expiration date. Never use a coffee pack with an expired date. 1.
Delivery of a cup of coffee 2. Press the coffee button (fig.8). • The [ stop ] button can be pressed at 1. Place a cup or mug on the cup grille in The machine will dispense coffee any moment to interrupt or cancel the indicated area under the right from the right outlet and stops after one delivery (fig.9).
Delivery of a pot of coffee 2. Press the button (fig.11). • The [ stop ] button can be pressed at 1. Place a pot under the right (coffee) any moment to interrupt or cancel outlet (fig10). • The machine will dispense coffee delivery (fig.12).
Delivery of hot water 2. Press the hot water button to start hot water delivery. • The [stop] button can be pressed at any moment to interrupt or cancel 1. Place a cup or mug on the cup grille in •...
Page 15
Relocating the machine unplug the power cord (fig.16). zontal and stable surface capable of holding the weight of the machine 2. Remove the coffee pack and store it It may be desirable to relocate the (19 Kg / 42 lbs). temporarily in a refrigerator (fig.4) machine for cleaning or coffee delivery at •...
Maintenance - Daily cleaning Important Switch the machine to stand-by before • Remove the trough by pulling it • Remove the driptray and cup grille you start the cleaning procedure (fig.19) downwards and draw it out (towards (fig.21). (the power cord must remain connected). front) as shown in figure 20.
Page 17
• Clean the entire dispense area with a • Reinstall all parts in reverse order clean damp cloth (fig.22). (1- driptray with grille, 2 - trough) (fig.23). • Refill the cold water tank if necessary. • Check if all parts are correctly reinstalled.
Maintenance - Weekly cleaning Ensure that the machine is switched to Cooling compartment Cold water tank stand-by (the power cord must remain connected). • Open the cooling compartment door. • Empty the cold water tank. • Remove the coffee pack (lift it gently •...
Preparations when the machine is not to be used over long periods Please take the following preparations 3. Open the cooling compartment door, Please take the following measures when the machine is not to be used remove the coffee pack (fig.28) and after the machine has not been used for a long period.
Page 20
4. Open the cooling compartment door 5. Switch the machine on and purge the 6. Refill the cold water tank (fig.32) and install a coffee pack (fig.30). water system by dispensing at least 15 (not applicable for machines with a cups of hot water (fig.31).
Troubleshooting Indication Cause Action Coffee empty (‘Replace The coffee pack is empty, incor- Replace the empty coffee pack. Check position of the coffee coffee pack’- indicator lights rectly installed or not present. pack and reinstall according the instructions on the coffee on).
Page 22
Indication Cause Action The On/ Stand-by The trough is not placed or Check and/or correct the trough. indicator is blinking incorrectly placed. (all machine functions ex- The safety circuit has been Switch the machine stand-by and on again. cept for cooling switch off). activated.
Page 23
Descaling the water tank This procedure is not applicable for machines with a fixed water connection. It is recommended to descale the water tank approx. every 6 months for the best machine performance. It may be necessary to descale the water tank more often in areas with a high water hardness.
Page 24
Quick reference for dispensers with a fixed water connection Daily cleaning 1. Switch off! 2. Remove parts 3. Clean interior 4. Clean parts 5. Reassemble Weekly cleaning Start with Continue with daily cleaning daily cleaning step 1 & 2 step 3 & 4 6.
Need help?
Do you have a question about the Cafitesse 50 and is the answer not in the manual?
Questions and answers