Page 2
Table of Contents Important Safety Instructions 3—5 Parts Introduction Installation Maintenance 10-11 Notes 12-13...
Page 3
WARNING To guard against injury, basic safety precautions should be ob- served, including the following: READ ALL SAFETY INSTRUCTIONS BEFORE USE. DANGER UV EXPOSURE: Do not operate lamp outside housing, direct exposure to UV rays can cause temporary reddening and irrita- tion of eyes and skin.
Page 4
To avoid the possibility of the ap- pliance plug or receptacle getting wet, position aquarium stand and tank to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop”, shown in the Figure at the right should be arranged by the user for each cord connecting an aquarium appliance to a receptacle.
Page 5
Make sure an appliance mounted within the tank is securely installed before operating it. Read and observe all the important notices on the appliance. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized out- let only one way.
Page 6
PARTS EXPLODED VIEW & IDENTIFICATION Description Part # Transformer Body MT-NZ-1 3 Watt UV-C Lamp MT-NZ-2 G5.3 Bi Pin Base Quartz Sleeve MT-NZ-3 O-Ring (Orange ) MT-NZ-4 O-Ring (Black ) MT-NZ-5 Quartz Sleeve Cover MT-NZ-6 6” - 1/2” Flexible Tubing MT-NZ-7 6”...
Page 7
Innovative Algae & Disease Control Thank you for purchasing the NanoZapp™, the smallest inline ultra-violet sterilizer to date. This miniature version was specifically designed for eradicat- ing harmful micro-organisms and unattractive green free-floating algae in fresh & saltwater aquariums less than 30 gallons. This revolutionary UV steri- lizer/clarifier is completely submersible, which can be placed discreetly be- hind the filter walls of most nano aquariums without ever being seen.
Page 8
CAUTION: Inspect UV Lamp & Quartz Sleeve Prior to Installation. Do not allow children to operate this aquarium appliance. Do not operate if appliance has a damaged cord or plug. Initial Inspection - For breakage Upon receiving this product please untighten the quartz sleeve cover and inspect the quartz sleeve and lamp for any damage.
Page 9
Installation into a Non JBJ Nano-Cube The NanoZapp™ was designed for the 28g Nano Cube Aquarium. But is so versatile that it can be used with most nano aquariums in the market. Each end of the sterilizer are installed with 1/2” diameter connectors. The total length of the NanoZapp™...
Page 10
Replacing the UV-C Lamp— 6 to 9 months The UV-C lamp has an average life span of 5000 hours of operation. Al- though the lamp may illuminate, it will not perform effectively for disease control. Lamp should be replaced before it expires. You can check the status of the lamp by an illuminated blue color at the bot- tom of the NanoZapp™.
Page 11
Recommended Maintenance Model MT-NZ3 UV Lamp G5.3 PI BIN (3 Watt) Volts/Hz AC110V/60Hz Pump Flow: Required 100 to 225 GPH Aquarium Capacity 30 Gallons Life Of UV Lamp Approx. 5000 hrs Avg. Quartz Sleeve Cleaning Every Month Schedule Wavelength 253.7 nm Dimensions 8”...
Page 14
TransWorld Aquatic Enterprises, Inc 3730 W. Century Blvd #3 Inglewood, CA 90303 Phone: (877) 374-9981 Visit us at www.jbjlighting.com...
Need help?
Do you have a question about the MT-NZ3 and is the answer not in the manual?
Questions and answers