Table of Contents
Advertisement
Preparation
Depending on your TV and other equipment there
are various ways you can connect the player.
Please refer to the manuals of your TV, VCR,
stereo system or other devices as necessary for
additional connection information.
Notes:
•
The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback. Position
the units away from each other or turn off the unit
after removing the disc.
•
Do not connect the unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Do not connect the unit via another VCR. The
DVD image could be distorted by the copy protec-
tion system.
Please ensure that an external cable/satellite box
•
is connected to the DVP3340V.
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
Rear of TV
VIDEO
AUDIO INPUT
VIDEO
INPUT
AUDIO INPUT
INPUT
L
R
L
R
V
A1
V
A1
Rear of DVD+VCR
Rear of DVD+VCR
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
C
unit to the video in jack on the TV using the video
cable supplied (V).
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the unit to the audio left/right in
jacks on the TV using the supplied audio cables
Y
Pr
Pb
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
(A2).
Note:
Rear of TV
If you use this connection, set the TV's source selec-
tor to VIDEO.
A2
S
R
L
AUDIO INPUT
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the DVD/VCR
OUT (A1, V) jacks.
Note:
The video may be displayed unstable.
Rear of DVD+VCR
C
A2
Pr
Pb
Y
R
L
COMPONENT/PROGRESSIVE SCAN
AUDIO INPUT
VIDEO INPUT
Rear of TV
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the
S-Video jack on the TV using the optional S-Video
cable (S).
Component Video / Progressive Scan
connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the unit's pro-
gressive scan output for the highest possible video
resolution.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding
jacks on the TV using an optional Y Pb Pr cable (C).
Audio connection
Connect the Left and Right AUDIO OUT jacks of the
unit to the audio left/right in jacks on the TV using the
supplied audio cables (A2).
Note:
If you connect both S-Video and component jack to
your TV, video displayed might be unstably on your
TV. You should disconnect one of both connections to
solve the problem.
S
11
Hide quick links:
Advertisement
Table of Contents
