Training HomeLink
Red Indicator
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit http://www.homelink.com or call (800) 355-3515.
If it is necessary to erase a previously
entered learned code:
• Press and hold the two outside
buttons for about 20 seconds,
until the red indicator blinks.
Release the buttons, and proceed
to step 1.
• If you are training the second or
third button, go directly to step 1.
Continued
uuHomeLink® Universal TransceiveruTraining HomeLink
381