Table of Contents
Advertisement
Available languages
Available languages
Listening to Nature Sounds
1.
Look on the bottom of the unit and make sure the TRAVEL LOCK is set to UN-
LOCK (Fig. 1). Power on the unit by pressing and holding the POWER button for 3
seconds (Fig. 3).
2.
Turn the center white ring around the speaker to choose what sound you wish
to listen to (Fig. 2).
3.
To adjust the volume, Press the one of the VOLUME buttons (Fig. 3) to your desired
level.
4.
When finished listening to the sounds you may turn them off by pressing and hold-
ing the POWER button for 3 seconds (Fig. 3).
NOTE: When the unit is turned on it will always default to the last sound used.
NOTE: If the unit does not work, check the bottom of the unit and make sure the travel
lock is set to unlock. The travel lock feature will prevent the unit from turning on while
traveling. It will turn the unit off if switched to lock while in use.
Using the Auto-Timer
1. When the power is on and you are listening to a nature sound you may set a timer so
the unit will automatically turn off.
2. Toggle through the TIMER button (Fig. 3) until the corresponding LED illuminates next
to the time or your choice, 15,30 or 60 minutes. The unit will automatically shut off
after the selected time. If you choose to listen to another timed sound press the timer
button to select a desired time. If you choose to listen to the sounds continuously,
press the Timer button until none of the 15, 30, or 60 minute LEDs are illuminated.
NOTE: If you have the unit on Auto-Timer and the unit shuts off after the selected time
you must turn the unit back ON in order to continue listening to your machine.
Maintenance
To Store
You may leave the unit on display, or you can store it in its box or a cool, dry place.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean.
Modifications not authorized by the manufacturer may void users authority to operate
this device.
3
Advertisement
Table of Contents
