Dell N2128PX-ON Getting Started Manual page 48

If you specified DHCP for the OOB or VLAN 1 management interface IP
address, the interface will acquire its IP address from a DHCP server on the
network. To discover the dynamically assigned IP address, use the console
port connection to issue the following commands:
• For the OOB interface, enter show ip interface out-of-band.
• For the VLAN 1 routing interface, enter show ip interface vlan 1.
To access the Dell OpenManage Switch Administrator interface, enter the
OOB management interface IP address into the address field of a Web
browser. For remote management access to the CLI, enter the VLAN 1
management interface IP address into a Telnet or SSH client. Alternatively,
you can continue to use the console port for local CLI access to the switch.
The N3132PX-ON switch supports basic switching features such as VLANs
and spanning tree protocol. The N3132PX-ON switches also support
advanced Layer 3 features such as dynamic routing and multicast. Use the
Web-based management interface or the CLI to configure the features your
network requires. For information about how to configure the switch features,
refer to the User Configuration Guide or CLI Reference Guide available on the
support site: dell.com/support.
46
Getting Started Guide