Table of Contents
Advertisement
To change a configuration value on the web page, type the desired value in the correct input field and press the
'Write' button next to it. After pressing the 'Write' button the current setting should immediately be updated on
the bottom half of the screen.
Important notes:
The MAC address can not be changed
Any changed IP-addresses or DHCP setting can require the Ethernet box to be restarted before becoming
active.
Entering incorrect IP-addresses can cause the embedded web page to become inaccessible and can cause
the Ethernet converter box not to function properly. If this has occurred, use method 1 or 2 to correct these
settings.
If the (local) IP-address of the Ethernet box is changed, be aware that the URL address in your Internet
browser needs to be changed as well to be able to view the embedded web page again.
Opticon Ethernet Converter
- 13
Advertisement
Table of Contents
