In order to invoke the warranty, the buyer must immediately send written notice to CLEODE of the flaws that it attributes to the device. It must enable CLEODE to have access to the device to observe these defects and repair them. The warranty provided by CLEODE is strictly limited to the equipment provided and shall only have for effect the replacement or repair, at CLEODE’s expense, on its own premises, of all devices or parts that are not...
ZigBee command of door lock – User Manual ABLE OF REVISIONS Version Authors(s) Version description Date CLEODE Initial version 19/09/2011 CLEODE Validated document 22/09/2011 UM_ZXPAND_20110919_001_01_00 CLEODE Page 4 sur 14...
ZigBee command of door lock – User Manual II ZXPAND DESCRIPTION II.1 EE PRESENTATION The network expander ZigBee ™ contains application type Range Extender defined in the standard Home Automation (Cf. document [2]). This node is fully compliant with the ZigBee™ PRO 2007 and Home Automation profile. For more detail on the data exchange between device and network, see documents [1], [2] and [3].
ZigBee command of door lock – User Manual II.2.2 LUSTERS DESCRIPTION This is a terse description of clusters and attributes which are implemented in the ZXPAND. For more detail on these, see document [1]. Basic cluster : This cluster is used to determine basic information about the device.
III.1 I NSTALLATION III.1.1 OUBLE SIDED TAPE INSTALLATION To mount the ZXPAND with a double-sided tape, follow this: 1) Stick a double-sided tape on the ZXPAND bottom 2) Dust the wall 3) Mount the ZXPAND on the wall III.1.2 ACCORDEMENT To connect the ZXPAND, follow the procedure this below.
III.3 R ESTART OF THE ASSOCIATION PHASE If the ZXPAND is not associated, the user can ask him at any time to join a network. For this, the user has to press during 3 seconds on the button.
ZXPAND flashing during 2 seconds and turn off . If the light of the ZXPAND does not flash after to have press on the button during 3 seconds, this means that he is already associated in a network. III.4 R ESET If need, the user can reset of the ZXPAND .
100 g Power supply 85-263 V / 50-60 Hz Measurement 54 x 52 x 32 mm Transmission range 100 m outdoor 30 m indoor 16 ZigBee™ channels (2.405 to 2.480 GHz) Managed channels (frequency) UM_ZXPAND_20110919_001_01_00 CLEODE Page 12 sur 14...
ZigBee command of door lock – User Manual EPAIR AND MAINTENANCE Defective equipments shall be first reported to the CLEODE support team in order to be assigned an RMA number. Be prepared to state your name, company and the serial number of the defective item to the support personnel.
Page 14
ZigBee command of door lock – User Manual CLEODE S.A. Technical Support Division 8, rue Bourseul 22300 Lannion France Phone : +33 (0) 2 96 48 68 18 Fax : +33 (0) 2 96 48 19 11 E-mail : support@cleode.com Web : http://www.cleode.com...
Need help?
Do you have a question about the ZXPAND and is the answer not in the manual?
Questions and answers