KneeRover GO User Manual

Congratulations on your purchase of the KneeRover GO
®
– The Most Compact & Portable Knee Scooter!
The KneeRover GO is designed for the person on the go that
®
won't let an ankle, foot or leg injury slow them down. Whether you
are a commuter, traveler, or just need a compact and portable
mobility device to go about your busy life– the KneeRover GO will
®
give you the freedom you deserve during your recovery.

Operating Instructions:

This medical device is designed to maximize mobility during your
recovery from foot/ankle surgery or injury.
Place the knee of your injured leg on the knee platform and stand as
straight as possible. Adjust the handlebar to waist height so the arms and
hands are in a comfortable position. Adjust the knee platform so that
your injured leg is supported at a 90 degree angle when standing.
Ensure that the hand brake is fully engaged before mounting the
KneeRover scooter. To move the scooter, simply push forwards or
®
backwards with your good foot. Allow the scooter to glide, and as it slows
down, push again.
Safety First:
The KneeRover scooter is designed for easy steering and stopping and
®
should be used to carefully move about at slow, controlled speeds. When
turning the scooter, you should have the brake applied and be moving at a
slow, safe, controlled speed. It is easy to tip the scooter if you are making
a turn with too much speed. Use caution and balance and operate at your
®
KneeRover GO
own risk.
With routine use, nuts and bolts on steering column and brake
Knee Scooter User Manual
mechanism can and likely will become loose. Periodically check nuts and
bolts after use and re-tighten as appropriate.