CONTENT 1. Introduction 2. Key and display 2.1 Key Function 2.2 Display 3. Operation 3.1 Before use 3.2 Zeroing the display 3.3 Taring 3.4 Percent weighing 3.5 Parts counting 3.6 Accumulation 3.7 Calibration 4. Battery operation 5. Parametering setting 5.1 Enter parameter setting 5.2 Setting the weighing unit 5.3 Setting the backlight 5.4 Setting the communication mode...
1. INTRODUCTION The MPB series of electronic balances offers an accurate, fast and versatile range of general purpose balances with counting, and % weighing functions. There are 6 models within the MPB series, with capacities up to 6000g. They have stainless steel weighing platforms placed on an ABS base assembly.
Description Stable indicator. Ensure it stable indicator is on before pressing tare, sample, percentage, or accumulation. Low battery; charge immediately. Tare indicator when in net weight mode. >T < Zero indicator >0 < 3. OPERATION 3.1 Before use To ensure that measurements are precise, turn on the scale 10 minutes prior to use. Recalibrate the balance when the operat+ing environment has been changed.
Note: the scale may jump by large numbers unexpectedly if small weights are used to set the 100% level. For example if only 23.5g is on a scale with 0.5g increments and the scale is set to 100%, the display will show 100.00%, however a small change of weight will cause the display to jump to 102.13% as one scale division (0.5g) increase to 24.0g will be equivalent to a 2.13% increase.
4. BATTERY OPERATION When the battery is low, the indicator will light up. Change the battery or use an AC adapter after it turns on. When battery indication show , charge the battery immediately. The battery life is approximately 40 hours. To charge the battery simply plug it into the mains power.