Advertisement
7.3 - FOOT SUPPORTS
In time the foot supports can detriorate loosing their elastic properties causing
instability. If this is the case replace them.
7.4 - POWER SUPPLY LINE
USE AND MAINTENANCE INSTRUCTION MANUAL
Periodically check
wear in the power cable and if necessary contact the
"SERVICE CENTRE" for a replacement.
7.5 - PUSH BUTTON LABEL
In time the label on the controls could become marked or even damaged. If this
should happen contact the "SERVICE CENTRE" for a replacement.
CHAP.8 - SCRAPPING
8.1 - OUT OF SERVICE
If the appliance for some reason is to be put out of service, make sure it can no
longer be used: disconnect and remove all electrical connections.
8.2 - SCRAPPING
Once the appliance is out of service it can be scrapped. Contact a specialised
company to scrap it conforming to the materials used for manufacturing the
various components. (refer to chap.1 para. 3.2).
SERVICE CENTRE
AUTHORISED DEALER
ATHOS "CE" PROFESSIONAL
16
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Sirman Athos
- Page 1 Once the appliance is out of service it can be scrapped. Contact a specialised company to scrap it conforming to the materials used for manufacturing the various components. (refer to chap.1 para. 3.2). SERVICE CENTRE AUTHORISED DEALER ATHOS “CE” PROFESSIONAL...
- Page 2 INTRODUCTION • This instruction manual gives the customer all the necessary information about the appliance and the manufacturing standards applied, as well as all instructions for use and maintenance so that the appliance can be used correctly maintaining its efficiency in time. •...
- Page 3 CHAP. 6 - REGULAR CLEANING CHAP. 6 - REGULAR CLEANING pag. 15 6.1 - GENERALITIES 6.2 - PROCEDURE TO FOLLOW FOR CLEANING THE APPLIANCE 6.1 - GENERALITIES • the appliance must be cleaned at least once a day or if necessary more than 6.2.1- cleaning the food tray and pestle 6.2.2- cleaning the disk and disk holder once.
- Page 4 CHAP. 1 - INFORMATION ABOUT THE APPLIANCE 1.1 - GENERAL WARNINGS • The appliance must only be used by personnel who has carefully studied this manual and understood all the safety standards described herein. • If there should be a turnover in personnel, it is necessary that this manual is carefully studied before using the appliance.
-
Page 5: Functional Check
4.4 - FUNCTIONAL CHECK The mozzarella chesse cutter is fitted out with: • To check the appliance works correctly proceed as follows: micro-switch automatically stops the appliance when outlet protective cover (see FIG. n°1) is removed. The appliance will not start if the cover is not 1. -
Page 6: Wiring Diagrams
1.3.3 - Appliance Components 4.3 - WIRING DIAGRAMS FIG. n°1 - general view of the appliance 4.3.1 - Wiring diagram for single-phase Power source sinphase 230V/50Hz POLARITY CONDENSER SIGN BROWN BROWN TRANSFORMER BLACK RELAY MOTOR BLACK FIG. n°6 - Wiring diagram Mn 4.3.2 - Wiring diagram three-phase MICROSWITCH ON BLADE GUARD POWER SOURCE THREE-PHASE 380V/50Hz... -
Page 7: Chap. 2 - Technical Data
Unless otherwise specified, all connections are for a 400V supply. If the appliance has to be adapted to a 230V three-phase circuit call the “SERVICE CENTRE ” for assistance. TAB. n°1 - MEASUREMENTS AND TECHNICAL CHARACTERISTICS Model u.m. ATHOS Length A Width B Height C Disk revolutions rev/1’... - Page 8 CHAP. 3 - CONSIGNING THE APPLIANCE 3.2 - CHECKING PACKAGING UPON CONSIGNMENT When the goods are received proceed with opening the packaging if there are no signs of damage, and make sure that inside there are all the listed items (see Fig. 3.1 - TRANSPORTING THE APPLIANCE (see FIG.
Need help?
Do you have a question about the Athos and is the answer not in the manual?
Questions and answers