Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Tag sys L-SA3
- Page 1 Library Stack Antenna L-SA3 User's Guide Revision 1.0 TAGSYS January 2005...
-
Page 2: Publishing Information
Library Stack Antenna L-SA3 User's Guide Publishing Information Disclaimer and Limitation of Liability All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such information. -
Page 3: Read This First
It provides a step-by-step guide for the following procedures: Installation of the Library Stack Antenna L-SA3 Configuring the product for use within your library system This guide is designed for all CIT (Certified Integrators by TAGSYS) and for TAGSYS Expert Network customers implementing a low-cost and high-performance RFID solution. -
Page 4: Glossary
Library Stack Antenna L-SA3 User's Guide Input/Output Interface Device Integrated Library System Light Emitting Diode Least Significant Bit Most Significant Bit Operating System Personal Computer Printed Circuit Board Random Access Memory Radio Frequency RFID Radio Frequency IDentification Reserved for Future Use... - Page 5 Read This First IEC Connector Three-pin connector used on sockets that carry mains electricity to the computer. All PCs use a male IEC connector and mains lead with a female IEC connector. Interrogation Pulse A signal transmitted by the coupler to activate the smart label’s transponder. Monitoring Port Parallel Port granting access to the HPI.
-
Page 6: If You Need Assistance
Library Stack Antenna L-SA3 User's Guide If you need assistance Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at: Telephone: +33 (0) 4 91 27 57 00 Fax: +33 (0) 4 91 27 57 01 E-Mail: info@tagsys.net... -
Page 7: Table Of Contents
Specific Installation using the Mounting Kit____________________________________________ 15 Operation _______________________________________________________________________________ 17 Single Item Configuration ____________________________________________________________ 17 Multiple Items Configuration__________________________________________________________ 18 Maintenance ____________________________________________________________________________ 19 Servicing the Library Stack Antenna L-SA3 ____________________________________________ 19 Antenna Tuning _____________________________________________________________________ 19 Technical Data __________________________________________________________________________ 20 Mechanical Characteristics ___________________________________________________________ 20 Electrical Characteristics_____________________________________________________________ 21... - Page 8 Library Stack Antenna L-SA3 User's Guide 8.1.3 How to Return Defective Products __________________________________________________ 23 8/24 Revision 1.0 January 2005...
-
Page 9: For Your Safety
1 For Your Safety General Use The Library Stack Antenna L-SA3 is designed to be rugged and reliable and to provide years of trouble-free service. Please observe the following general tips: Take care not to scratch the device. Keep the device clean. When working with the device, use only TAGSYS-approved accessories. -
Page 10: Important Safety Information
Library Stack Antenna L-SA3 User's Guide Important Safety Information 1.3.1 Operating Environment Follow all special regulations that are applicable in any area and always switch off the device whenever its use is prohibited, or when it may cause interference or danger. -
Page 11: Certification
European Standard EN 50357 describing how to evaluate the exposure level. It is the responsibility of the TAGSYS Partner to install the Library Stack Antenna L-SA3 as described in TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate antennas. -
Page 12: In Usa (Fcc Directive)
Library Stack Antenna L-SA3 User's Guide 2.2.2 In USA (FCC Directive) The Library Stack Antenna L-SA3 has been designed to comply with Part 15 of the FCC Rules. Furthermore typical configurations based on a Medio L100 have been successfully tested with Part 15 of the FCC rules (FCC ID Number: QHKLSA2ANT). -
Page 13: Overview
(OEM product). In this case, a non-metallic material must be used for this packaging. Due to its specific design, the Library Stack Antenna L-SA3 can be safely used in proximity with other TAGSYS RFID products. It will work also, if properly installed, in metallic-type environments (see Section 4, "Installation"... -
Page 14: Delivery Kit
Library Stack Antenna L-SA3 User's Guide Figure 2: L-SA3 Antenna without Cover Delivery Kit The items listed in Table 1 are included in the delivery kit. Table 1: Contents of the Delivery Kit Quantity Description L-SA3 Antenna with 1 coaxial cable... -
Page 15: Installation
Do not place the antenna cable close to other cables, especially power cables. Active Area in Desktop Configuration The unique design of the L-SA3 antenna restricts the active area of the magnetic field radiated by the antenna to the area immediately above the cover. - Page 16 Library Stack Antenna L-SA3 User's Guide Metallic or conductive parts must not be present in front of the active face of the antenna. For best performance, always request an installation compliance agreement from TAGSYS Custom Services regarding your specific installation.
-
Page 17: Operation
Operation 5 Operation L-SA3 antennas can be set-up in several different ways. The antenna configuration and the choice of its components depend on the individual library. The L-SA3 antenna operates best when connected to the TAGSYS L-L100 Reader for library applications. -
Page 18: Multiple Items Configuration
Library Stack Antenna L-SA3 User's Guide Performances are given in standard configuration for a single tag operation and measured in the center of the antenna, (Tag attached to a book) using TAGSYS ISO Library Test Software. Multiple Items Configuration Table 3: Multiple Items Performances... -
Page 19: Maintenance
Maintenance 6 Maintenance Servicing the Library Stack Antenna L-SA3 CAUTION: The Library Stack Antenna L-SA3 contains no operator serviceable parts and must only be serviced by qualified personnel. No regular servicing is required, except for keeping the unit clean. It is recommended that the antenna unit be inspected at least once per year by an approved TAGSYS technical representative. -
Page 20: Technical Data
IP 21 Operating Temperature 0 °C to 55 °C (32 °F to 131 °F) Storage Temperature -25 °C to +60 °C (-130 °F to 140 °F) Figure 6: L-SA3 Antenna Mechanical Diagram (Cover) (in millimeters) 20/24 Revision 1.0 January 2005... -
Page 21: Electrical Characteristics
Technical Data Figure 7: L-SA3 Antenna Mechanical Diagram (Bare Antenna) (in millimeters) Electrical Characteristics Description Value Maximum Input Power 1.5 W Operating Frequency 13.56 MHz Impedance 50 ± 5 Ω and 0 ± 5 ° Antenna Connection 50-Ω BNC Connector Antenna Connection cable 50-Ω... -
Page 22: Warranty Conditions
8 Warranty Conditions Warranty TAGSYS warrants that its Library Stack Antenna L-SA3 (Product) shall comply with the functional specifications set forth herein for a period of one year from the date of delivery to the Buyer. This warranty is valid for the original Buyer of the Product and is not assignable or transferable to any other party. -
Page 23: General Provisions
Warranty Conditions 8.1.2 General Provisions This warranty sets forth the full extent of TAGSYS responsibility regarding the Product. In any event, TAGSYS warranty is strictly limited to (at TAGSYS’ sole option) the replacement or refund of the Products purchase price to TAGSYS, of Products considered as defective by TAGSYS. - Page 24 Library Stack Antenna L-SA3 User's Guide Product Return Form Customer Profile: Contact Name: ............Company: ..............Contact e-mail: ............Address: ............................... Contact Phone: ............................Contact Fax:............. City & State:............... Zip Code: ..............Country: ..............Order identification: Invoice Number: ............
Need help?
Do you have a question about the L-SA3 and is the answer not in the manual?
Questions and answers