Download Print this page

Power On/Off; Basic Function Introduction - MTX MDP02 User Manual

1080 fhd hd driving recorder

Advertisement

Function 3:Press up button to turn up the volume when replaying video.
Function 4:In replay mode, press up button to enter 9 screen preview.
6、Down:
Function 1: In menus: selects next item in list
Function 2: Press down button to zoom out when taking video or pictures.
Function 3: Press down button to turn down the volume when replaying
video.
Function 4:Press the down button to turn on/off the audio when in standby
mode or replaying video.
7、Parking Mode:
Function 1: Press the parking mode before turn off the device. It will have P
appear which means it has entered into parking mode. It will automatically
power on to take record and save the video file before power off.
Function 2:
If you want to cancel the parking mode, press the parking mode and you will
see the P disappear on the left side corner of the screen.
3. Battery Charging
Two ways:
1. Use USB data cable to connect with computer.
2. Use the original car power supply.
Charging remind: the LCD screen will appear the charging icon, after fully
charge, the icon will not l
Charging time: around 120 minutes
4. TF Card Preparation
TF card requirement: this device requires TF card speed over CLASS6.
Install and Remove TF Card
1. Insert the TF card into the slot until it is firmly fixed.
2. When remove the TF card, press the card it will be pop-up
Attention:
1. Do not remove the TF card while it is working.
2. Please pay attention to the direction when inserting the card. If reverse it
is it would probably damage the device or card.
3. When you insert the card into device, this device will set the card as
storage place then the data of the previous card cannot be read.
4. If the TF card cannot match with device, please insert again or change
another card.
5. Support 4~64G

5. Power ON/OFF

1. Short press power button
the power button
, the device will turn off.
2. Auto on/off when driving: plug into 5V car power supply. The device will
start and recording. When stop driving, it will base on menu selection to
save the current video and then auto turn off in 10 second.
Note: When low power of built-in battery, it will automatically save video and
turn off.

6. Basic Function Introduction

1. Switch working mode
This device has 3 working modes: video mode, photo mode and replay
mode. Press MODE to switch.
2. Setting the menu and system
In video or photo mode, press (MENU) twice to enter system setting
, the screen will be lightened. Long press

Advertisement

loading