Summary of Contents for ZIV TRS-10
- Page 1 TIMER REMOTE WITH VIDEO TRS-10 COMPATIBLE WITH SONY CAMERAS WITH A MULTI-TERMINAL USER MANUAL...
- Page 2 PRECAUTIONS • Please read and follow these instructions, and keep this manual in a safe place. • There are no user-serviceable parts inside the device. Do not attempt to disassemble or perform any unauthorized modification. • Do not operate the unit in the presence of flammable gas or vapors. • Do not handle with wet hands or immerse in water or expose to rain. Failure to observe these precautions could result in fire or electric shock. • Keep out of the reach of children. This device contains small parts which may pose a choking hazard. • Do not use or leave the device in conditions of extreme heat, severe cold, or high humidity. • Clean the unit with a soft, dry cloth. • Make sure the item is intact and that there are no missing parts. • Handle the unit with care. • All images are for illustrative purposes only.
- Page 3 OVERVIEW Transmitter Receiver 17. LCD screen USB port 2. Indicator light 18. Indicator light 3. LCD screen 19. USB port 4. Bulb exposure [ 20. Battery cover 5. Single/continuous 21. 2.5 mm trigger output 22. Channel increase/ shooting [ 6. Power/channel [ video stop* [ Directional pad 23. Power/Channel 8. Shutter button decrease* [ 9. Timed exposure [ ] 24. Cold-shoe mount 10. Video mode [ 25.
- Page 4 Transmitter Receiver...
-
Page 5: Continuous Shooting
SINGLE SHOOTING Press [ ] until CS appears on the LCD screen. Half press the shutter release button to focus. Press fully to take a shot. CONTINUOUS SHOOTING Press [ ] until CS appears on the LCD screen. Set your camera to a continuous shooting mode. Half press the shutter release button to focus. Press and hold the shutter release to trigger continuous shooting. Release the shutter button to stop continuous shooting. -
Page 6: Bulb Shooting
DELAYED SHOOTING Press and hold [ ] until Delay appears on the LCD screen. Press the [ ] button until the onscreen numbers are flashing. Use the directional pad to change settings. (Left digits = Number of shots) (Right digits = Delay before shots) Half press the shutter release button to focus. Press fully to start countdown and exposures. BULB SHOOTING Set the camera and remote into Bulb mode. Half press the shutter release button to focus. Press fully to start Bulb shooting. Press again to stop Bulb shooting. -
Page 7: Timed Shooting
TIMED SHOOTING Press [ ] to enter timed shooting. Use the directional [ ] to switch between settings. Press [ ] until numbers flash on the LCD, and use the [ ] buttons to change the selected values. [DELAY] Delay before start time [LONG] Exposure time [INTVL] Interval between exposure [N1] Number of shots Press [ ] to start the sequence. VIDEO SHOOTING N1: Time Elapsed Video Recording Press [ ] until N1 appears on the LCD screen. Press [ ] to start video recording. Use the ] buttons to adjust zoom. Press [ ] again to stop recording. - Page 8 N2: Timed Video Recording Press and hold [ ] until N2 appears on the LCD screen. Press [ ] until the time is flashing. Use the ] buttons to change the value. Press [ ] to start video recording. Use the ] buttons to adjust zoom. Once the time has run out, the remote will reset. CONNECTIVITY AVAILABLE FUNCTIONS Multi Interface Port • Timed/ delayed/ bulb/ single and continuous shutter release • Optical and digital zoom • Video shooting 3-pin Port • Timed, delayed, bulb, single, and continuous shutter release...
-
Page 9: Specifications
SPECIFICATIONS Channels Operation distance 328 ft. (100 m) Transmitter standby 1000 hr. Receiver standby 300 hr. Power Transmitter 2 AAA batteries Receiver 2 AAA batteries Dimensions Transmitter 5.35 × 1.8 × 0.66 in. (H × W × D) 135.9 × 45.7 × 16.8 mm Receiver 2.75 × 1.5 × 0.99 in. 70 × 38 × 25 mm Weight Transmitter 1.6 oz. (45.4 g) -
Page 10: One-Year Limited Warranty
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Ziv Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Ziv along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.zivphotogear.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com ZIV is a registered trademark of the Gradus Group.