Download Print this page

LC kids 2830-8900 Assembly Instruction Manual

Crib madison

Advertisement

Quick Links

Assembly Instruction
WARNING:
Do not use this crib if the enclosed or attached instructions cannot be strictly
adhered to. Do not use this crib if the child is able to climb out unaided or is taller
than 89 cm. Do not place cords, straps or similar items that could become wound
around the child's neck in or near this crib. Ensure that the sides are properly
latched or locked in place when the crib is occupied. The mattress used with this
crib should not be more than 15 cm thick and should be of such length and width
that the gap between the mattress and the sides of the crib is not more than 3 cm
when the mattress is pushed into the corner of the crib.
09-004
WARNING:
Failure to follow these warnings and assembly instructions could result in serious
injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR
FUTURE USE.
Never use plastic shipping bags or other plastic film as mattress covers
because they can cause suffocation.
Infants can suffocate in gaps between the crib sides and a mattress that is
too small.
Infants can suffocate on soft bedding. Never add a pillow or comforter.
Never place additional padding under an infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their backs to sleep, unless otherwise advised by your physician.
STRANGULATION HAZARD: Strings can cause strangulation! Do not
place items with a string around a child's neck, such as hood strings or
pacifier cords. Do not suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of
the body or clothing on loose fasteners.
DO NOT place crib near window where cords from blinds or drapes may
strangle a child.
FALL HAZARD: When child is able to pull to a standing position, set
mattress to lowest position and remove bumper pads, large toys and other
objects that could serve as steps for climbing out.
Stop using crib when child begins to climb out or reaches the height of 35
in. (89cm).
Check this product for damaged hardware, loose joints, loose bolts or other
fasteners, missing parts or sharp edges before and after assembly and
frequently during use. Securely tighten loose bolts and other fasteners. DO
NOT use crib if any parts are missing, damaged or broken. Contact Legacy
Classic Kids for replacement parts and instructional literature if needed. DO
2830-8900 CRIB MADISON
Page 1 of 6

Advertisement

loading

Summary of Contents for LC kids 2830-8900

  • Page 1 Assembly Instruction 2830-8900 CRIB MADISON WARNING: Do not use this crib if the enclosed or attached instructions cannot be strictly adhered to. Do not use this crib if the child is able to climb out unaided or is taller than 89 cm. Do not place cords, straps or similar items that could become wound around the child’s neck in or near this crib.
  • Page 2 Assembly Instruction 2830-8900 CRIB MADISON NOT substitute parts.  DO NOT use a water mattress with this crib.  Replace teething rail if damaged, cracked or loose. NOTE: This is only for cribs with teething rails.  If refinishing, use a non-toxic finish specified for children’s products.
  • Page 3: Tools Required

    Assembly Instruction 2830-8900 CRIB MADISON HARDWARE ENCLOSED: (F) Hex bolt screws: M6 x 38 – 8 pcs (G) Bottom head bolt M6 x 17 – 4 pcs (H) Lock washer M6 – 12 pcs (I) Flat washer M6– 12 pcs NOTE: Store all hardware out of child’s reach.
  • Page 4 Assembly Instruction 2830-8900 CRIB MADISON Fig (1) 3. To change the position of the Mattress Metal Base (C), unscrew the 4 bolts (G), Lock washer (H), Flat washer (I), line up the Mattress Metal Base (C) with the holes at the desired height and re-attach the Mattress Metal Base (C) with the same bolts (G), Lock washer (H), Flat washer (I).
  • Page 5 Assembly Instruction 2830-8900 CRIB MADISON 5. Assemble the Front Gate (E) to the crib using 4 same Bolts (F), Lock washer (H), Flat washer (I). Tighten using the Hex Allen Wrench (J). (See Fig 3) Fig (3) 6. Tighten all connections. Assembly is complete.
  • Page 6: Care Instructions

    Assembly Instruction 2830-8900 CRIB MADISON CARE INSTRUCTIONS  Dust often using a clean, soft, dry lint-free cloth.  Blot spills immediately, and wipe with a clean, damp, cloth.  We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.