Table of Contents
Advertisement
•
Access point in use (Must be
defined) - Choose an Internet access point (IAP) for the
mailbox. See Connection settings, p. '95'.
•
My e-mail address (Must be
defined) - Enter the e-mail address given to you by your
service provider. Replies to your messages are sent to this address.
•
Outgoing mail server (Must be
defined) - Enter the IP address or host name of the
mail server that sends your e-mail.
•
Send message
- Define how e-mail is sent from your phone:
Immediately
- The device starts to establish a connection to the mailbox after you have
selected
Send
message.
When conn. avail.
- E-mail is sent when the connection to the remote mailbox is
available.
•
User name
- Enter your user name, given to you by your service provider.
•
Password:
- Enter your password. If you leave this field blank, you will be prompted for
the password when you try to connect to your remote mailbox.
•
Incoming mail server (Must be
defined) - Enter the IP address or host name of the
mail server that receives your e-mail.
•
Mailbox type:
- Defines the e-mail protocol that your remote mailbox service provider
recommends. The options are
POP3
and cannot be changed if you have saved or exited from the mailbox settings. If you are
using the POP3 protocol, e-mail messages are not updated automatically in online
mode. To see the latest e-mail messages, you must disconnect and make a new
connection to your mailbox.
•
Security
- Used with the POP3, IMAP4, and SMTP protocols to secure the connection
to the remote mailbox.
•
APOP secure login
(not shown if IMAP4 is selected for
POP3 protocol to encrypt the sending of passwords to the remote e-mail server while
connecting to the mailbox.
User settings
•
E-mails to retrieve
(not shown if the e-mail protocol is set to POP3) - Define how many
new e-mails will be retrieved to mailbox.
and IMAP4. This setting can be selected only once
Mailbox
type) - Used with the
Copyright © 2005 Nokia. All rights reserved.
61
Advertisement
Table of Contents
