Network Scanner - Hawking HMPS2U User Manual

F. Try to issue a print job to the desired printer. You will see the HMPS2U will
automatically do a connect operation and allow you to print.
G. Even you already properly setup an auto-connected printer, the HMPS2U software
must be running (in the background) while a print job is issued. This means you
should have the HMPS2U software run every time after you login into your computer.
In order to skip this manual operation, you can make the HMPS2U run automatically
after you login to your computer. To do this, choose the "Configuration" item in the
"Tools" menu. The following window will appear. Click on the check box and then on
the "OK" button. This feature is enabled by default.
If you would like to break the association between the Windows printer and the physical
printer, just click on the association and click the "Delete" button in the "Auto-Connected
Printer List".
4.6

Network Scanner

For NetUSB scanning, we recommend you use Network Scanner as the following steps.
A. In the HMPS2U software, click the HMPS2U that has the desired MFP (or scanner)
attached.
B. Click the desired MFP (or scanner).
18