Advertisement
CHAIR ASSEMBLY INSTRUCTIONS:
Line up the screw holes of one side of the seat and back rest to one of the chair
sides and screw in place with the Allen wrench provided. Then screw the second
chair side to the opposite side of the seat and back rest.
Attach the plastic hooks of the 5 point harness to the metal rings on the bottom of
the back part of the seat. Loop the single short crotch strap through the harness
buckle and also through the slot at the front of the chair seat. Then buckle the
crotch strap tightly to its own buckle to complete the 5 point harness.
Please note that the 5 point harness should only be used when the Deluxe
Poppy Plus is being used as a high chair. Remove the harness when using as a
toddler table and chair combination.
TRAY ASSEMBLY INSTRUCTIONS:
Line up the chair arm rest and tray holes and screw in place with the 2 smaller
screws using the Allen wrench provided.
TABLE ASSEMBLY INSTRUCTIONS:
Insert the table top into the grooves of one of the table frame sides and the 2
grooved table edges and screw in place. Line up the screw holes of the same
frame side of the table with the foot rest bar and the round bar and screw in place.
The foot rest bar will have a small dowel inserted into the table side and will have
a larger dowel pointing to the underneath side of the table to help position the
chair in place when using as a high chair. Insert the opposite second frame side
into the grooved table edges, foot rest and round bar and screw in place with the
Allen wrench provided.
To use the table as a base for the high chair, turn the table on its side with the
solid table top at the back side of the high chair. Carefully lift the chair and
position it into the table base using the large dowels to guide it into place.
PRIMO Deluxe Poppy Plus Instruction Guide – PRI-408
Page 3 of 6
Advertisement
